Skip to main content

Happy Nerding

23 products

Official site

Mixer

  • 2xSAM is a 4 HP dual stereo attenuator-mixer with separate stereo outputs for attenuator duties, a stereo mixer output, and optional 5x input gain to raise line levels to modular amplitude.

  • 3xMIA

    3xMIA

    $100

    3xMIA is a 6-channel attenuverting mixer, offset, scale and polarizer built from 3 blocks of 2-channel attenuverting mixers using dual concentric pots.

  • 4x St. Mixer

    4x St. Mixer is a 4 HP quad stereo mixer with right inputs normalled to left inputs for easy mono operation, and a DC coupled signal path that also works as a CV mixer.

  • 6xMIX

    $100

    6xMIX is a six channel AC coupled audio mixer in 6 HP, with its channels arranged in three groups that each have a separate output and can be cascaded into 2-2-2, 4-2 or 6 channel configurations.

  • PanMix

    PanMix is a 6 channel mixer with manual and CV panning and volume controls, with a total volume knob, headphone output and 10 segment LED metering.

  • PanMix Jr is a high quality 3 channel AC coupled mixer with manual panning and volume controls of mono sources with dual concentric knobs.

  • 3x Stereo Mixer

    Discontinued

    3x Stereo Mixer is a high quality 3 channel stereo mixer with manual volume controls. Total mix Left and Right outputs are available on separate jacks, plus an L&R stereo jack that can route the mix via a single stereo cable or drive headphones.

Filter

  • FUN VCF is a double state variable filter with common controls and separate outputs. Its core is based on the soviet Polivoks synthesizer's filter, featuring new stock KR140UD1208 and KR140UD18 operational amplifiers.

  • HN VCF is a 6 HP state variable filter with 12 dB low pass, 12 dB high pass, 6 dB band pass and an 18 dB low pass with extra drive, each of its three parameters offering bipolar CV control.

  • MMM VCF

    MMM VCF (Moog Multi Mode Voltage Controlled Filter) is a dual voltage controlled filter with common controls for both parts, usable as a stereo filter or patched in other combinations of its inputs and outputs.

Utility

  • 4xMUTE

    4xMUTE provides four sections of clickless muting and unmuting suitable for both audio and CV, with a button that glows green while the signal is passing and red while it is muted.

  • Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A and B, bigger knobs are CV attenuverters, and the DC coupled signal path works for audio and CV alike.

  • Isolator is a 4 HP solution for galvanic isolation between its inputs and quarter inch TRS balanced outputs, interfacing a Eurorack system with external equipment without an electrical connection and preventing ground loop issues.

Multi Effect

  • FX AID

    Eurorack effects module running 32 unique audio effects arranged in 4 banks of 8, with three effect controls, an analog Dry/Wet control with its own CV input and a high quality stereo signal pass.

  • FX AID Pro

    Stereo effects module for Eurorack with 200 onboard effects that can be arranged in any order with an online editor, an OLED screen showing the current effect and its three parameters, and three internal LFOs, in 14 HP.

Effect

  • Super Sawtor

    Super Sawtor is a module designed to produce unison like waveforms from an incoming signal, with the unison spread tuned to give almost the same harmonics smearing as the famous Roland JP80x0 supersaw oscillator.

Equalizer

  • TriTone

    TriTone is a three section EQ plus saturator, with Hi Shelf, Band Pass and Low Shelf sections that each offer +20 dB of gain and 30 dB of reduction and can be used independently or serially chained.

Fm

  • FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator, and the module copies FM the way it is done in digital implementations but in a completely analog circuit free of digital aliasing artifacts.

Gain

  • 3xVCA

    $150

    3xVCA offers three high class linear amplifier circuits in 6 HP. Thanks to AC / DC compatibility, a very low noise floor and basically no distortion, the module suits control voltages as well as audio material.

Meter

  • LED Meter

    LED Meter is a handy utility module designed to show audio levels, with 30 LED segments covering roughly 30 dB of measurement range.

Modulation

  • ADSR (Attack-Decay-Sustain-Release) is a module designed to generate a voltage, which acts as the envelope with the adjustable stages. This envelope, generated in response to the incoming gate signal or manually pushed button, can then be used to shape the sound amplitude via VCA, modulate filter's cutoff frequency or any other parameters expecting CV control.

Summing Mixer

  • OUT

    Eurorack output module providing two balanced outs, Left and Right, for the sum of its two stereo inputs, with a separate headphone output on a 1/4 inch jack and an LED meter on the main out.

Synthesizer

  • Discontinued

    HM VCO (Hearn Morley Voltage Controlled Oscillator) is an analog VCO giving the four classic waveforms, sawtooth, pulse, triangle and sine, in a narrow 6 HP width.

This data is open source. View or improve this entry on GitHub. View on GitHub

Catalog data as of