1029
$1,499
The AEA 1029 is an ultra-clean stereo VCA compressor in a half-rack chassis, featuring a proprietary discrete op-amp design by Fred Forssell and two THAT 4305 VCA chips driven by a single RMS detector.
Outboard
58 products
- AEA Ribbon Mics
API AudioMC531 Monitor Controller
$2,495
Standalone desktop monitor controller derived from API's analog console center section, with 3 balanced analog inputs, AES3 and USB digital inputs, Bluetooth, 3 stereo balanced outputs, 2 headphone outputs, mono subwoofer output, talkback mic, and 18-segment stereo LED metering.
BenchmarkDiscontinued
The DAC2 D is a 2-channel digital-to-analog converter designed for professional studio and high-fidelity audio applications, featuring lower noise and distortion than its predecessor. It emphasizes transparency and accuracy for critical monitoring and reference-quality playback.
BenchmarkDiscontinued
The DAC2 DX is Benchmark's 2-channel D/A converter featuring lower noise, lower distortion, and improved accuracy compared to the DAC1. It supports native DSD conversion (DoP 1.1), an asynchronous USB Audio interface, and is designed to directly drive power amplifiers and powered speakers.
BenchmarkDiscontinued
The Benchmark DAC2 HGC is a second-generation 2-channel digital-to-analog converter with lower noise and distortion than the DAC1, featuring 32-bit quad-balanced D/A conversion, UltraLock2 jitter attenuation, native DSD support, and a Hybrid Gain Control headphone amplifier stage.
BenchmarkDiscontinued
The DAC2 L is a second-generation 2-channel digital-to-analog converter from Benchmark Media Systems, offering reference-quality conversion with lower noise and distortion than its predecessor, the DAC1. It shares the same features and performance as the DAC2 HGC but omits the headphone amplifier.
BenchmarkDAC3 B
$1,899
The DAC3 B is a professional-grade digital-to-analog converter designed for studio monitoring and high-fidelity audio applications, featuring fixed output levels without built-in volume control. It offers jitter-immune UltraLock3 clocking, linear-phase filters, and high-headroom DSP.
BenchmarkDiscontinued
The DAC3 DX is a professional-grade 2-channel digital-to-analog converter designed for studio monitoring and high-fidelity audio playback, featuring native DSD64 and PCM conversion with Benchmark's UltraLock3 jitter attenuation system. It offers dual stereo output buses, a zero-ohm HPA2 headphone amplifier, and supports asynchronous USB Audio 2.0 alongside AES/EBU, coaxial, and optical digital inputs.
BenchmarkDAC3 HGC
$2,399
The DAC3 HGC is a high-resolution digital-to-analog converter combining professional studio-grade engineering with hi-fi listening in a half-rack, 1U form factor. It features a motorized Hybrid Gain Control volume system, a zero-ohm HPA2 headphone amplifier, jitter-immune UltraLock3 clocking, and support for PCM up to 192 kHz and native DSD.
BenchmarkDAC3 L
$2,099
The DAC3 L is a professional-grade digital-to-analog converter built around the ESS ES9028PRO converter chip, delivering 128 dB SNR and THD+N of -113 dB. It removes the headphone amplifier found in the DAC3 HGC while retaining identical sonic performance, dual XLR balanced outputs, dual RCA unbalanced output pairs, and five digital inputs.
- Bricasti Design
The Bricasti Design M1 Series II is a high-performance D/A converter featuring the MDx processor platform with fully differential analog output design, supporting PCM up to 384kHz and DSD up to 256fs via USB. Milled from solid aluminum with point-to-point wiring and Stillpoints isolation. Handcrafted in the USA.
- Bricasti Design
The Bricasti M1 Series II Platinum combines the M1 Series II DAC with the MDx Network Processor Board factory-installed. It adds Ethernet streaming and network playback while retaining the original discrete Class A balanced analog output stage. Handcrafted in Massachusetts, USA.
- Bricasti Design
The Bricasti M1 is a dual mono digital-to-analog converter featuring two completely isolated channels, each with its own dedicated linear power supply, D/A converter, DDS clocking, and analog circuitry, supporting DSD64/128/256 and PCM up to 352.8kHz.
- Bricasti Design
The Bricasti M11 is a resistor ladder (R2R) D/A converter concentrating ladder D/A technology from the flagship M21, featuring the MDx digital platform with native signal processing and a fully differential output design, supporting PCM up to 384kHz and DSD via USB.
- Bricasti Design
The Bricasti M11 Series II is a resistor ladder (R2R) D/A converter featuring the MDx digital platform with native signal processing and a fully differential analog output stage, supporting AES/EBU, S/PDIF, Toslink, USB, and optional Ethernet network streaming.
- Bricasti Design
The Bricasti M12 Platinum is the M12 Source Controller with the MDx Network Processor Board factory-installed, combining DAC, preamplifier, headphone amplifier, and network streamer functions. Balanced XLR and unbalanced RCA outputs, Ethernet connectivity, and a trigger output are included. Handcrafted in Massachusetts, USA.
- Bricasti Design
The Bricasti M12 is a dual mono source controller and D/A converter that consolidates digital and analog signal processing with network streaming capabilities and a pure dual mono analog signal path. Handcrafted in Massachusetts, USA.
Bricasti DesignThe Bricasti M19 is an SACD/CD transport designed around simplicity and uncompromising performance, intentionally omitting upsampling, DACs, and digital inputs. Features dual independent linear power supplies with medical-grade toroidal transformers and a milled aluminum chassis. Handcrafted in Massachusetts, USA.
- Bricasti Design
The Bricasti M21 is a reference D/A converter with three independent user-selectable conversion paths (delta-sigma, ladder DAC, and DSD). Supports USB, AES/EBU, S/PDIF, Toslink, and wired Ethernet streaming. Handcrafted in Massachusetts, USA.
- Bricasti Design
The Bricasti M21 Platinum is the M21 DAC with the MDx Network Processor Board factory-installed, adding streaming and network playback without requiring a separate upgrade. All three D/A conversion paths (delta-sigma, ladder, and direct DSD) remain, along with Ethernet connectivity. Handcrafted in Massachusetts, USA.
Bricasti DesignThe Bricasti M3 is a high-performance stereo D/A converter featuring dual fully differential conversion channels with separate PCM and native DSD support, precision DDS clocking, dual independent linear power supplies, and an optional Roon Ready network player.
- Bricasti Design
M5 Network Player
$2,500
The Bricasti M5 is a dedicated network media renderer that connects via wired Ethernet to deliver lossless audio to digital-to-analog converters, supporting DLNA and Roon Ready protocols with PCM up to 192kHz and DSD.
- Bricasti Design
MC1
$7,000
The Bricasti Design MC1 is a fully-differential stereo reference D/A converter featuring two completely isolated channels, each with its own dedicated linear power supply, D/A converter, DDS clocking, and analog circuitry. Handcrafted in Massachusetts, USA.
Burl AudioB22 ORCA
$2,695
Control room monitor daughter card for the B16 and B80 Mothership, featuring 4 DAC channels with all-class-A BOPA14 discrete circuitry, switchable BX5 output transformers, 2 stereo speaker outputs, and a stereo headphone output.
Burl AudioB26 Orca
$3,499
Discrete class-A control room monitor controller featuring BURL NextGen Analog circuitry with BOPA10 and BOPA8 op-amps, three stereo mix inputs, two stereo speaker outputs, and independent studio and headphone sends.
- Crane Song
HEDD Quantum is Crane Song's AD/DA converter and master clock unit, using the same sub-picosecond jitter clocking as the Avocet IIA DAC on both its AD and DA stages, with added toslink optical I/O, six new word clock outputs, and Crane Song's tube and tape DSP emulation.
Dangerous MusicCONVERT-2
$3,299
Eager to develop a new and better DAC, we designed the CONVERT series converters from the ground up, utilizing cutting-edge digital technology.
Dangerous MusicCONVERT-8
$3,849
Whether you're tracking, mixing or mastering, the CONVERT-8 will deliver powerful low-end, articulate mids, and transcendent highs to every channel in your rig.
Dangerous MusicCONVERT-AD+
$3,299
Packed into a single rack space with next-generation conversion for the ultimate in musicality and transparency, the CONVERT-AD+ is an advanced stereo analog-to-digital converter.
KlipschThe Heritage Active Crossover is a DSP active crossover network designed specifically for Klipschorn AK7 and La Scala AL6 loudspeakers, delivering time and phase alignment, balanced EQ, and true-to-source response. Tuned by acoustician Roy Delgado, it builds on technology from the Klipsch Jubilee and offers user-adjustable LF and HF gain controls.
- Lexicon
Discontinued
The Lexicon Signature 284 was an all-tube Class A stereo recording amplifier and direct source, Lexicon's unique foray into guitar amplification. This product is discontinued.
Louder Than LiftoffDiscontinued
The original Silver Bullet mk1 (discontinued, superseded by Silver Bullet mk2) — a unique collaborative effort between Louder Than Liftoff and industry veteran drBill that marries drBill's vintage Tone-Amp experimentations with Louder Than Liftoff's modern design approach and aesthetic. This labor of love offers a first-of-its-kind analog topology and workflow designed for, and easily integrated into, the modern DAW-based studio. The Silver Bullet was designed to enhance and shape tracks to sound like a record during every phase of audio production from composition to the final mixdown.
Louder Than LiftoffSilver Bullet mk2
$2,849
The Silver Bullet mk2 is the culmination of over 7 years of dreaming, designing, and building: a flagship 2RU stereo Bus/Line/Mic Tone-Amp that brings real analog mojo and streamlined workflow to the modern DAW-based studio. While maintaining the hallmark intuitive workflow of the original mk1 unit thanks to the abundance of I/O and the built-in matrix router, the mk2 features expanded user-customizable MOJO, increased Tone Shaping options, and the new ASPECT RATIO stereo image enhancer—making this desert island tool even more versatile and powerful. It includes fully balanced inserts, a leveled-up meter, cascading Mojo Amps, and an expansion slot accepting Mojo Modules or Colour Modules.
MarantzCD 60
$1,100
Extraordinary sound and peerless style—Marantz CD 60 celebrates your CD collection with a player engineered to sound better than any other in this class. Built with high quality materials and Sound Master tuned, CD 60 adds precision CD playback to MODEL 40n or any high-quality audio system.
MarantzCD6007
$650
The Marantz CD6007 is a slimline CD player with custom HDAM circuitry designed for aspiring audio enthusiasts. It supports CD and CD-R/RW playback, exclusive HDAM SA2 output buffers, high-resolution USB-A audio file playback (FLAC, WAV, AIFF, ALAC, DSD), and a front-panel headphone output with volume control.
MarantzSACD 10
$14,000
The reference-standard SACD 10 is crafted to be the very best using a fully Marantz designed SACDM-3 transport mechanism for maximum rejection of resonance. Featuring a proprietary SACDM-3 disc transport, CD playback, and DAC inputs, SACD 10 offers high-resolution audio support for external source components and digital inputs for other sources. From the triple-layer aluminum chassis with copper shielding to entirely original multi-layer PCBs, isolated sub-enclosures, and HDAM module, SACD 10 is the product of decades of expertise in audio engineering, setting a new benchmark with meticulous construction, state-of-the art technologies, and remarkable design. SACD 10 retains the sonic Marantz signatures of warmth, spaciousness, and resolution, with advances in design and precise tuning by the Sound Master resulting in the purest expression of the Marantz sound ever. Made for the ultimate CD and SACD enthusiast, SACD 10 is engineered with updated Marantz Musical Mastering and a next generation HDAM module for impeccably detailed audio reproduction.
Tascam1U rack-mount master clock generator built around a high-precision OCXO (±0.01ppm accuracy) for large professional audio and video systems. Distributes word clock, AES3/11, S/PDIF, and video sync (NTSC, PAL, HD Tri-level) across 12 BNC word clock outputs, 4 BNC video outputs, 2 AES XLR outputs, and 2 S/PDIF RCA outputs. Accepts 10MHz atomic/GPS reference for self-calibration.
TascamCG-2000
$3,222
Professional 1U rack-mount master clock generator for broadcasting stations and post-production facilities, featuring an OCXO (±0.01ppm accuracy) with redundant power supplies and redundant A/B video/word clock inputs for mission-critical reliability. Distributes word clock, AES3/11, S/PDIF, and video sync across 12 BNC word clock outputs, 4 BNC video outputs, 2 AES XLR outputs, and 2 S/PDIF RCA outputs. Accepts 10MHz atomic/GPS calibration input.
Universal AudioGet legendary FET compression with tone and attitude, true to the original.
Universal AudioGet classic tube and solid-state tones with 1176-style compression and professional A/D conversion.
Universal Audio6176 Vintage Channel Strip
$4,374
Get a classic tube mic preamp and 1176LN compressor in a single unit.
Show all 58 products
Universal AudioGet tube and solid-state sonics and everything in-between with this unique mic pre/DI.
Universal AudioAdd a classic tube mic preamp & LA-2A-style compressor to your studio.
Universal AudioOX Amp Top Box
$1,874
Get legendary studio tones from your tube amp — anywhere, at any volume.
Universal AudioGet the all-tube 610 Console Mic Preamp sound in a rugged, “go anywhere” design.
Universal AudioGet UA’s famed optical tube compressor, true to the original design.
Universal AudioUAD-2 Satellite Firewire
$1,749
Serious analog sound for FireWire-equipped Macs and PCs.
Universal AudioGet the rich analog sound of UAD plug-ins over Thunderbolt.
Universal AudioUAD-2 Satellite USB
$2,379
Get the rich analog sound of UAD plug-ins over USB 3 on Windows.
This catalog is open source. View or improve the data on GitHub. View on GitHub