AHM-16
$1,499
With an unrivalled price-performance ratio, AHM-16 delivers a 16x16 matrix with uncompromised processing for single room applications and smaller multi-room environments including bars, restaurants, shops and school halls.
71 products
$1,499
With an unrivalled price-performance ratio, AHM-16 delivers a 16x16 matrix with uncompromised processing for single room applications and smaller multi-room environments including bars, restaurants, shops and school halls.
$1,999
With 32 zone outputs, echo cancelling and audio networking options, AHM-32 is ideal for multi-room installations in hospitality, corporate and education environments.
$3,999
64x64 Audio Matrix Processor. The most powerful matrix processor in the AHM range, scaling to large campus installations with up to 64 zones, 96 controllers and hundreds of system I/O.
$162
The Audreio plug-in is designed to stream high quality audio (32-bit over cable, 16-bit over Wifi) from one computer to another computer or to an iOS device running Audreio iOS.
Expand the Monitor ST with up to 4 additional modules for D/A conversion, digital input switching, video source switching, and custom RS232 device control, all from the original Monitor ST remote.
Discontinued
Ethernet AVB expansion card for dbx SC 32 and SC 64 matrix processors, enabling networked digital audio transport and control via Cat 5e cable.
12x6 Digital Zone Processor for commercial audio applications with advanced signal processing and Ethernet control.
12x6 digital zone processor with fixed I/O and pre-configured architecture for installed audio systems, including configurable insert processing and optional audio channel duplication via link bus.
12x6 digital zone processor with Ethernet control for commercial audio applications, providing comprehensive signal processing and routing.
12x6 digital zone processor with fixed I/O, pre-configured architecture, and configurable insert processing for professional audio applications.
$1,100
6-input, 4-output digital zone processor for commercial audio installations, featuring Advanced Feedback Suppression (AFS), AutoWarmth, parametric EQ, compression, limiting, noise gating, and RS-232/wall panel control.
6-input, 4-output fixed-architecture digital zone processor with pre-configured input/output processing, insert points, AutoWarmth on all output zones, and optional device duplication via link bus.
6-input, 4-output digital zone processor for commercial audio with Advanced Feedback Suppression (AFS), AutoWarmth, parametric EQ, compression, limiting, bandpass/crossover filters, and RS-232/wall panel control.
6-input, 4-output fixed-architecture digital zone processor with wizard-driven configuration, hardware mic gain control, AutoWarmth on every output zone, and link bus for multi-unit duplication.
A passive stereo input switcher kit that allows selecting among 10 stereo (or 20 mono) 1/4-inch inputs to route to a single stereo output pair, with no coloration or gain change.
$0
A free utility plug-in that enables inserting and mixing sound at any point within a signal chain, useful for merging harmonies/drums or splitting sound to separate tracks.
A Eurorack utility module that takes a single audio or CV input, applies attenuation, and routes the signal to any or all of four selectable outputs.
A simple quad passive switch module for switching between sets of 4 signals, either 2:1 or 1:2 configuration. It requires no power to operate.
$249
An ABY switcher using silent optocoupler-based soft switches with a custom-wound isolation transformer to split a guitar signal to two amps without pops or hum. Each channel has switchable JFET buffers for driving long cable runs.
DKK 299
A passive averaging mixer that accepts up to three inputs of audio, CV, envelopes, clock, or triggers. It succeeds the Herzlich Labs Plenum with the same function in a nicer enclosure.
A passive averaging mixer that accepts up to three inputs of audio, CV, envelopes, clock, or triggers. It succeeds the Herzlich Labs Plenum with the same function in a nicer enclosure.
DKK 379
A passive averaging mixer that accepts up to three inputs of audio, CV, envelopes, clock, or triggers. It succeeds the Herzlich Labs Plenum with the same function in a nicer enclosure.
DKK 299
A passive multiple that creates 3 identical copies from 1 input signal, accepting both CV and audio signals.
A passive multiple that creates 3 identical copies from 1 input signal, accepting both CV and audio signals.
DKK 379
A passive multiple that creates 3 identical copies from 1 input signal, accepting both CV and audio signals.
DKK 369
A passive multiple that replicates a signal to multiple destinations, functioning as either a 1x8 mult or a 2x4 mult since the top inputs are normalled to the lower inputs.
$170
A 12HP 5-input voltage-controlled scanning audio/CV mixer and panner with dedicated attenuator sliders, an offset switch, and dual scan voltage control inputs for dynamic scanning motion across channels.
$10
How about a few of these little robot buddies sitting on top of your rack, instead of in it? 1x3 passive mults with mandatory robots, and optional magnets for easy stacking/attaching.
$120
The JHS Pedals Switchback is a true bypass A/B effects loop switcher with two selectable send/return loops and Red Remote compatibility, functioning as an A/B box, looper, or amp input switcher.
CA$40
A set of five Eurorack blank panels in various widths that also function as signal mults through electrically connected holes.
$343.99
An entry-level programmable switching system for guitar effects featuring 6 true-bypass loops, 100 presets, and six 9V DC power outputs. It offers Direct/Edit Mode for manual loop control, Recall Mode for presets, and a Master Bypass function.
$599.99
A compact 5-loop programmable switcher offering up to 150 preset effect combinations with MIDI PC/CC message support and two latch/unlatch switch signals for amp channel switching. Features Direct and Program modes with six 9V DC power outputs.
$437.99
A programmable 5-program loop switcher featuring 4 series loops, 1 separate loop, master bypass, mute/tuner out switch, and a BJF buffer, capable of storing 50 programs across 10 banks.
$1,312.99
A programmable loop switcher with seven serial and three parallel effects loops, full MIDI control, and Bluetooth control via the WINGLINK iOS app.
$112.99
A power distributor offering 8 center-negative 9.6V DC outputs and 2 center-negative 18V DC outputs, capable of powering up to 10 effect pedals.
$312.99
An ultra-compact 5-loop true bypass loop switcher with tuner out, power supply for effects, and a built-in BJF buffer.
$33.99
A DIY effects loop box kit that can function as an A/B box, mute switch, or instrument input selector.
A DIY true-bypass loop switcher kit featuring 5 effect loops, 1 tuner out, and six DC power outputs.
$32.99
A DIY passive A/B box kit used to switch a signal between two outputs or two inputs.
$30.99
A DIY 2-in/2-out junction box kit for managing pedalboard input and output connections.
$68.99
A compact true-bypass effects loop switcher that can also function as an A/B box, input selector, or mute switch. It uses a passive circuit and does not require power for switching, though an optional 9V adapter enables the LED indicator.
$68.99
A compact AB/input selector switch box that can route a single input to two outputs or two inputs to one output, also usable as a tuner/mute switch. It includes LED indicators that require a 9V power supply to function.
$137.99
A versatile utility box combining A/B switch, true bypass loop switcher and input selector functions with a BJF buffer circuit.
A two-loop switcher with a switchable BJF Buffer and a dedicated TOGGLE footswitch that instantly reverses the status of both effects loops.
A compact loop switcher with switchable BJF Buffer on the input and two DC outputs for powering other effects.
A MIDI-controllable stereo effects loop switcher with two loops that can convert mono signals to stereo.
A passive true-bypass input selector that switches between two instruments via footswitch or MIDI, and can be reversed to act as a stereo A/B box.
A clean blender pedal that mixes an effects loop signal with the dry signal, controllable via an expression pedal, with a polarity switch and BJF Buffer.
A wet/dry blender pedal that adds individual wet and dry level controls, a trail function for natural effect decay, a phase switch, and an optional BJF buffer circuit.
A junction box with two inputs and two outputs plus a switchable BJF Buffer and polarity reverse switch to simplify pedalboard connections.
$181.99
A single stereo loop switcher supporting TRS stereo connections for use with two amplifiers or stereo recording setups, with mono/stereo and normal/rapid switching modes.
$168.99
A compact loop switcher pedal combining true bypass loop switching with a BJF buffer circuit.
A 2-loop flash-loop switcher with a switchable BJF Buffer on the input and two DC power outputs for connected effects.
$261.99
An ultra-compact 3-loop true bypass loop switcher with tuner out, power supply for four effects, and a built-in BJF buffer.
A Eurorack module providing two bi-directional electronically controlled switches that route a common jack to one of two other jacks based on an applied CV signal, supporting both audio and CV signals.
$299
A balanced output expander for the MKII versions of the Performance Mixer and Channels, providing 16 pre-fade and post-fade outputs via a DB25 connector for multitrack recording.
A passive expansion module for the PM MKII or Channels MKII that provides 4 stereo direct outputs, selectable as pre-fader or post-fader, via 3.5mm jacks.
$139
A passive expansion module for the PM MKII providing three additional stereo aux returns that can be summed into the main mix or balanced outputs via a toggle switch.
A voltage-controlled 2-way switch module built around the DG419 SPDT switch IC, used to route a single source to two destinations or two sources to one destination.
This catalog is open source. View or improve the data on GitHub. View on GitHub