Sontronics

A valve condenser microphone hand-built in England with a large-diaphragm gold-sputtered capsule, designed for vocals, voiceover, and acoustic instrument recording with warmth and clarity.

A large-diaphragm condenser microphone designed for kick drum and bass instruments, capable of handling sound pressure levels up to 155dB.

A small-diaphragm condenser microphone designed for capturing snare drum and other percussion instruments with high-SPL handling up to 135dB.

A small-diaphragm condenser microphone designed to capture detail from tom-toms and other percussion instruments like cajón, djembe, bongos, tabla and congas.

A variable-pattern valve condenser microphone hand-built in the UK, offering a fully sweepable polar pattern from omni to figure-of-eight and cardioid for vocals and instruments.

A multi-pattern condenser microphone with three switchable polar patterns (cardioid, omni, figure-of-eight), offering low self-noise and clarity for vocal, instrument, and ensemble recording.

A multi-pattern large-diaphragm condenser microphone with nine selectable polar patterns via a digitally encoded controller, offering low self-noise and high sensitivity for vocals and instruments.

A small-diaphragm condenser microphone suited to recording instruments including woodwind, strings, percussion, brass and guitar, with three-stage filter and pad controls.

A matched stereo pair of small-diaphragm cardioid condenser microphones designed for accurate stereo miking of instruments, ensembles and ambient recordings.

A high-performance JFET large-diaphragm condenser microphone with a boutique Lundahl transformer, hand-built in England, delivering clarity and warmth for vocals and instruments.

A dynamic microphone with a supercardioid capsule designed for live vocals, streaming and home recording, offering focused pickup and excellent side rejection.

A dynamic microphone with a supercardioid pickup pattern designed specifically for miking guitar amplifiers, offering excellent side rejection and detailed reproduction without additional EQ.

A professional dynamic microphone with a supercardioid pickup pattern designed for podcast, broadcast, gaming, streaming, and video calls, featuring an internal pop filter and high output level.

A handheld dynamic microphone with a supercardioid pickup pattern and high-output capsule, designed for live performance, studio recording, and home use with superb off-axis rejection.

A wireless supercardioid dynamic microphone capsule designed for compatibility with Shure handheld wireless transmitters, delivering the vocal character of the SOLO microphone.

A limited edition dynamic microphone with a special colour way and unique laser engraving, built on the Podcast Pro platform for podcast, broadcast, voiceover, streaming, gaming, and video calls, supplied with an XLR to USB cable and desktop stand.

An 8-pin microphone cable designed for use with the Sontronics ARIA 2, MERCURY, and legacy ARIA and MERCURY VE microphones. It securely connects the microphone to its power supply with locking connectors on both ends.

A connecting lead that splits the upper and lower ribbon channels of the Sontronics Apollo 2 microphone into two individual standard XLR connections, allowing both channels to be powered independently.

A cable that converts a 3-pin XLR microphone signal to USB-C, with included smartphone and USB-A adapters for connecting dynamic microphones to computers, phones or tablets.

A leather-look, zip-up, lightly padded pouch designed to protect and store compatible Sontronics microphones during transport or storage.

Replacement elastic bands for Sontronics spider-style shock mounts, designed to isolate microphones from vibration and handling noise.

A replacement grille for the Sontronics SOLO dynamic microphone, complete with an internal foam windshield to protect the capsule and reduce plosives and wind noise.

An active stereo ribbon microphone with two ribbon motors set in X-Y Blumlein formation, designed for stereo recording of orchestras, choirs, and solo instruments with smooth highs and balanced lows.

A rugged active ribbon microphone designed for high-SPL sources like guitar amps, saxophone, and brass, delivering warm ribbon tone without overloading.

An active phantom-powered ribbon microphone with a figure-of-eight polar pattern, offering high sensitivity and low self-noise for vocals, wind, string instruments, and guitar amps.

A custom-designed shock mount built for the APOLLO 2 and SATURN 2 microphones, offering secure attachment to a boom stand with an adjustable locking mechanism for precise positioning.

A shock mount designed to provide secure, stable support for the Sontronics DELTA 2 and SIGMA 2 microphones with an adjustable locking mechanism for precise positioning.

A complete shock mount designed for the Sontronics STC-20, STC-2 and STC-3X microphones, providing secure attachment and vibration isolation with an included pop-filter attachment.

A microphone clip designed for small-diaphragm pencil condenser microphones, mounting securely to standard microphone stands and boom arms.

An adjustable bar designed to hold two pencil microphones for stereo recording techniques such as AB, XY, ORTF, NOS and DIN. It features high-torque thumbscrews and 5/8-inch mic mounts with a 3/8-inch thread adapter.

A hypercardioid capsule for the STC-1 and STC-1S microphones offering greater side rejection than standard cardioid patterns for isolating sound sources in noisy or reverberant environments.

An omnidirectional capsule for the STC-1 and STC-1S microphones providing 360-degree sensitivity for capturing ambient audio, room acoustics, or group performances.

A versatile desktop-mounted broadcast-style boom arm with three lockable articulated joints, integrated cable management, and a 360-degree rotating base.

A professional-grade pop filter with a dual-layer nylon mesh that reduces plosive and sibilant sounds during vocal recording, mounted on a flexible gooseneck arm.