368 products
A replacement black faceplate for the Bitbox MK1 or MK2, machined from anodized aluminum with a bead-blasted finish. Designed for the traditional module orientation with the screen on top, using the same faceplate as used in manufacturing but in black.
$29.95
Do you like swapping firmware, but want your faceplate to match? Did you get a scratch on your module and feel the need to repair it? We now offer replacement faceplates for touchscreen modules. Choose which faceplate you want from the options below.
$29.95
Replacement knobs for 1010music products, sold in single-color packs of 4. Use them to replace damaged knobs or swap the stock color for a different one.
$9.95
The nanobox battery case protects and powers your nanobox for use while traveling. The hard-shell case with magnetic closure keeps your nanobox safe in your backpack. The embedded battery pack ensures you can use the nanobox along the way and when you get there. Plug in headphones and you can make music along the way.
$79
The A Series is compatible with a comprehensive range of third-party mounting solutions by using the A Series Mounting Plate.
Now your desktop monitors and studio essentials can be taken on the road with the D3V Travel Bag. Exclusively available via our webstore.
Premiere Pro is a tool for professional video editing, allowing you to capture, edit, and deliver virtually any format, from dv to uncompressed hd.
$199
Official 'Decksaver' case cover for 52HP 6U case. Unique Smoked/clear transparency Decksaver colour.
£55
Official 'Decksaver' case cover for 84HP 3U case. Unique Smoked/clear transparency Decksaver colour.
£55
Official 'Decksaver' case cover for 84HP 6U case. Unique Smoked/clear transparency Decksaver colour.
£65
Official 'Decksaver' case cover for 84HP 9U case. Unique Smoked/clear transparency Decksaver colour.
£95
£5
Mono 3.5mm mini jack to mono 6.35mm (1/4″) jack cable. Useful for connecting eurorack modules (i.e S.B.G.) to external gear such as guitar effects pedals.
£8
5 Pin DIN socket connecting to two 3.5mm mono jacks. Breaks out the ‘Clock’ and ‘Run’ signals from a Din Sync cable to mini mono jacks.
£9
3.5mm TRS jack to 5-Pin MIDI DIN socket. Break out MIDI signals into a 3.5mm stereo mini jack.
£6
Pam Sync is a FREE simple ‘just works’ DAW plugin for syncing Pamela’s Workout to your DAW’s clock via low latency audio signals. It uses 2 audio (i.e. line-level) outputs from your host DAW to provide the necessary clock and run signals. All configuration is done within Pam itself. Available as VST3, AU, and AAX.
£5
Mono 3.5mm mini jack to mono 6.35mm (1/4″) jack cable with the protection of a 'floating ring' (nothing mystical, just the middle part of the large jack connects to nothing - i.e floats - as a safety precaution when connecting your modular to expression inputs on guitar pedals etc) Included with both the S.B.G. or S.B.G-PRO for safe expression pedal patching, these can be purchased as replacements or spares.
£8
Replacement custom branded ALM 4GB USB Stick. Newer style stick with both a USB-A connector on one end (for Squid) and a plastic removable capped USB-C connector on the other.
£20
Replacement 1-inch titanium tweeter and recone kit for Amphion studio monitors, designed for user-serviceability to extend the life of trusted monitors as part of Amphion's sustainability approach.
Interchangeable color grids for Amphion 12" loudspeakers, available in eight pre-selected RAL colors or custom colors on request, designed to let users update the appearance of their speakers to match evolving interior design.
User-changeable color grids for Amphion 15" loudspeakers, available in 8 RAL color options with custom colors available on request, designed to match speakers to interior design preferences.
User-changeable color grids designed to match Amphion 18" loudspeakers to interior design preferences. Available in eight pre-selected RAL colors as well as custom colors upon request.
Adjustable wall brackets that allow Amphion home audio speakers to be mounted securely to walls without requiring additional floor space. Available in black and white, compatible with Argon1, Argon0, and Helium510 speaker models.
Replacement aluminum passive radiators for Amphion studio monitors, designed to protect woofers during low-frequency operation. Surrounds can wear over years of use and are designed to be user-replaceable as part of Amphion's sustainability approach.
Heavy-duty zero-flex steel wall and ceiling mount adaptor for Amphion studio monitors, compatible with König & Meyer mounting hardware. Enables pin-point accurate imaging for immersive studio setups.
Audeze’s custom-built travel case is the perfect way to protect your headphone investment, even if you drop it, spill liquids on it, bring it to a Head-Fi meet or the recording studio. As long as your headphones are in this case (and it’s closed), it’ll keep them safe.
$175
Audeze Silicone Eartip set for Euclid headphones, including small, medium, and large pairs. Audeze accessories are designed to work only with Audeze headphones, and offer no warranty when used with other headphones.
$10
Replacement microphone for the Audeze Maxwell, Mobius and Penrose gaming headsets.
$40
Replacement accessories for iSINE LX, VR, 10, 20, LCDi3, and LCDi4 headphones, including ear hooks, ear fins, eartips, and a cleaning tool.
$25
The LCD-4 floating Carbon Fiber Headband provides comfort for hours of listening pleasure available for all LCD series.
$200
Audeze LCD ear pads. Compatible with all Audeze LCD headphones except LCD-1 and LCD-5. Available in leather and leather-free variants.
$90
Our LCD Spring Steel Suspension Headbands are designed to distribute weight evenly across your head, reducing hotspots and promoting comfort for extended listening sessions!
$125
The Audeze LCD-5 and 5s feature a totally redesigned frame, including our newest iteration of the Carbon fiber headband. Fully tension adjustable with the included tools, these headbands provide hours of comfortable listening. Please note, these headbands are only compatible with headphones with the redesigned frame, including LCD-5, LCD-5s and MM-500 and will not fit our standard LCD series headphones.
$200
Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.
$95
Audeze LCD-5 earpads are available on our website! LCD-5 earpads are compatible with LCD-5 headphones.
$125
Audeze LCD-S20 ear pads are available on our website. LCD-S20 earpads are compatible with LCD-S20 headphones.
$50
Maxwell 2 earpads. Made from PU leather and memory foam. A newly redesigned geometry features a wider opening for improved comfort. The Audeze Maxwell 2 earpads are comfortable for long gaming sessions.
$45
The Maxwell 2 headstrap. Also compatible with the original Maxwell. Features an increased width and a perforated strap for increased comfort. Dimensions 70mm x 256mm. Material PU Leather.
$15
Replacement low-latency 2.4GHz USB-C wireless dongle for the Audeze Maxwell 2 wireless gaming headset. Sold in Xbox and PlayStation versions; not compatible with the original Maxwell.
$35
Original Maxwell earpads. Made from PU leather and memory foam, the Audeze Maxwell earpads are comfortable for long gaming sessions.
$45
The original, non-perforated Maxwell headstrap. Also compatible with Maxwell 2. Dimensions 46mm x 256mm.
$15
Replacement low-latency 2.4GHz USB-A wireless dongle for the original Audeze Maxwell wireless gaming headset. Sold in Xbox and PlayStation versions; not compatible with Maxwell 2.
$35
Cloth carry bag for MM-100 headphones. Features the MM Series Logo.
$15
Audeze MM-100 ear pads are available on our website! MM-100 earpads are compatible with MM-100 Professional headphones.
$50
Audeze MM-500 ear pads are available on our website! MM-500 earpads are compatible with Audeze MM-500 headphones.
$90
The Audeze MM-500 features our newest headband design. Flexible and easily adjustable, this is the perfect fit for your gear.
$80
Replacement memory foam ear pads for the Audeze Mobius and Penrose wireless headphones. All color variants fit all Mobius and Penrose models.
$30
Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.
$20
Audeze's custom-lined economy travel case is a more affordable way to protect your headphones from everyday wear and tear. Less rugged than the premium aluminum LCD case, but great for light and everyday use to and from the studio.
$120
The DPH12 is a drum holder designed for use with Austrian Audio's OC7, OD5, CC8, and CC8-SC microphones. It provides a secure mounting solution for attaching these condenser microphones to drum shells or percussion instruments during studio sessions and live performance.
$59
Replacement ear cushions for the Austrian Audio Hi-X50 on-ear headphones.
$65
Replacement ear cushion set for the Austrian Audio Hi-X55 over-ear headphones.
$65
The Hi-X55CUK is a replacement ear cushion kit for the Austrian Audio Hi-X55 headphones. Designed to support the long-term serviceability of the Hi-X55, this kit allows users to replace worn or damaged ear cushions and maintain the original comfort and acoustic performance of the headphones.
$89
Replacement ear cushion set designed for use with the Hi-X65 and Hi-X60 headphones.
$49
Replacement ear cushion kit for the Austrian Audio Hi-X65 and Hi-X60 headphones.
$89
Replacement headband cushion for the Austrian Audio Hi-X headphone series. Compatible with Hi-X65, Hi-X60, Hi-X55, Hi-X25BT, Hi-X15, Hi-X20, PG16, and The Arranger.
$39
The MCH1 is a microphone clip accessory designed for use with Austrian Audio handheld microphone models including the OC707, OD505, and OD303.
$35
MiCreator Minibar desktop stand accessory for the MiCreator product line. Compatible with MiCreator Satellite and MiCreator Studio.
$25
MiCreator System Case — a storage and carrying case for the MiCreator product line. Compatible with MiCreator Satellite, MiCreator Studio, and MiCreator Y-Lav.
$50
Set of 4 blank customization plates (2 front, 2 back) in white and black for personalizing the MiCreator Satellite microphone system.
$24
Set of 4 blank customization plates (2 front, 2 back) in white and black for personalizing the MiCreator Studio microphone system.
$29
Protective microphone pouch compatible with OD303, OC707, OD505, CC8, OC16, OC18, and OC818 microphones.
$25
The OCC8 is a replacement capsule for the Austrian Audio OC818 large-diaphragm condenser microphone.
$39
Aluminum dual carry case designed to protect and transport two Austrian Audio OC818 or OC18 large diaphragm condenser microphones.
$149
$35
The OCP8 is a protective cap/cover accessory for Austrian Audio microphones. Compatible with the OC818, OC18, OC16, OD505, OC707, and OD303.
$59
The OCR8 is a Bluetooth dongle that enables wireless control of the OC818 microphone. It pairs with the free PolarPilot smartphone app to let engineers and musicians remotely control polar patterns, pad settings, and high-pass filter settings in real time.
$199
Stereo recording bracket compatible with Austrian Audio condenser microphones, designed for dual microphone stereo setups.
$59
$299
Spacer plates for The Composer headphones, used to adjust ear cup positioning or acoustics.
$199
Protective travel case designed specifically for The Composer reference headphone.
$79
Replacement ear cushion inner set (ECIS) for The Composer flagship headphones by Austrian Audio.
$49
Replacement ear cushion upper set (ECUS) for The Composer flagship headphones by Austrian Audio.
$179
The Befaco 7U Backpack is a padded, expandable carrying bag purpose-built to transport the Befaco 7U Case, with a dedicated laptop compartment, cable-organizer pockets, and cabin-friendly dimensions.
The Befaco Synth Duster is a super-soft cleaning brush designed to keep modular synthesizers and audio equipment free from dust accumulation. It is a non-electronic maintenance accessory with no patch points or power requirements. Compact and purpose-built for use in and around Eurorack cases and studio gear.
Neutrik SpeakON cable plugs sold by Benchmark Media Systems for building speaker cables. Available in NL2 (2-pole) and NL4 (4-pole) variants. Sold individually.
$8
Rack-mounting solutions that join two half-width 1U Benchmark components or mount a single unit alongside a blank plate in a standard 19-inch rack. Available as a coupler kit or as a premium blank plate in silver or black.
$99
Rack mounting tray that accommodates two half-wide 1U Benchmark units in a single rack space. Compatible with all half-wide DAC1, DAC2, DAC3, ADC1, and MPA1 units, with or without rack ears.
Die cast aluminum infrared remote control for Benchmark Media Systems audio components, featuring dedicated input selection buttons, a -20 dB DIM button, and separate on/off buttons for universal remote integration.
$100
Premium 8mm gold-plated locking banana connector for speaker wire. The barrel-twist locking mechanism expands inside the binding post socket for a very low resistance connection. Accepts 10 AWG to 4 AWG wire. Sold individually.
$15
Engineered 36-inch speaker stands for the Benchmark SMS1 monitors with multistage sonic isolation and decoupling at every contact point. Black anodized extruded aluminum column with three internal channels for cable management and ballast fill. Sold as a pair.
Take-anywhere premium travel guitars that feel like your full size instrument.
A padded woven polyester gig bag designed to fit the Blackstar Carry-on ST guitar and Carry-on Mini guitar, with an ergonomic carry handle, backstraps for hands-free transport, and a zipped accessory pocket.
Premium 600 Series S3 loudspeaker stand. Get the best possible performance from your 600 Series stand-mount speakers with the dedicated speaker stand.
$300
High-performance 700 Series S3 loudspeaker stand. The stand-mount speakers in the 700 Series work best on these elegant FS-700 S3 stands, available in black and silver finishes.
$820
A dedicated loudspeaker stand engineered to optimize the performance of the Bowers & Wilkins 805 D4 standmount loudspeakers. Available in Silver and Black finishes.
$1,720
Dedicated centre-speaker stand engineered for the Bowers & Wilkins HTM81 D4 and HTM82 D4 flagship centre channels. Available in Silver and Black finishes.
$1,100
Premium M-1 speaker stand. M-1 is among our smallest and most adaptable speakers, and the bespoke FS-M-1 stand only adds to its versatility.
$400
A premium wall bracket produced specifically to complement the look, finish, and design of the Bowers & Wilkins Zeppelin speaker. Fits the 2021 Zeppelin only.
$100
The Bricasti MDx is an internal upgrade board that adds network streaming and Ethernet connectivity to compatible Bricasti DACs including the M1 Series II, M12, and M21. It supports Roon, AirPlay 2, and UPnP playback and installs in the factory expansion slot.
Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4030L studio ribbon microphone.
Stereo mounting bar for dual placement of the Coles 4030L microphone, with adjustable head-to-head positioning between zero and 90 degrees for M-S and coincident stereo configurations.
Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4038 studio ribbon microphone.
Stereo mounting bar for dual placement of the Coles 4038 ribbon microphone, with bi-directional positioning adjustable between zero and 90 degrees for coincident stereo and M-S configurations.
Rigid plastic carry case with custom foam cut-outs for safe storage and transport of a single or stereo pair of the Coles 4050 ribbon microphone.
Stand adaptor for the Coles 4038 microphone with built-in XLR connector, providing a direct connection to both the microphone stand and output cable in a single brass-finished unit.
Stand adaptor for the Coles 4038 microphone with built-in XLR connector and phantom power blocker, preventing 48V phantom power from reaching the ribbon element when used with preamps that cannot disable phantom independently.
Anti-vibration stand adaptor for the Coles 4038 microphone with built-in phantom power blocker, combining mechanical vibration isolation with protection against 48V phantom power reaching the ribbon element.
Replacement PVC handle grip covers for the Coles 4104 Commentators Microphone. Available individually in brown or as a multi-pack of 5 colours.
Clip-on hygiene mouth shields for the Coles 4104 Commentators Microphone, providing a sanitary barrier between the user and the microphone head. Supplied in packs of 10.
Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4104 Commentators Microphone or the 4115 Broadcasters Microphone.
Soft velvet bag with drawstring closure for protecting Coles ribbon microphones from metal particles and dust contamination during studio use. Available in Large (for the 4038) and Small (for the 4050).
The EOL Box is used as an End of Line (EOL) termination in audio systems that use a 20kHz pilot tone to detect open and short conditions in loudspeaker circuits.
Four-channel rack-mount step-up transformer accessory that provides 70V/100V constant-voltage outputs for Crown ComTech DriveCore amplifiers that lack built-in high-impedance output capability.
Peace, Love & Fuzz is a book by Steve Ridinger telling the amazing story of Danelectro guitars, Snark tuners, and Foxx pedals. It chronicles Ridinger's entrepreneurial journey, including his founding of FOXX pedals, the 1998 relaunch of Danelectro guitars, and the creation of Snark tuners.
$9.99
Features a heavy-duty steel tripod base and double-braced legs.
$129.99
Designed with a 13″ seat top, and the strength of a cast, under-seat, vise mount and double-braced legs.
$159.99
Designed with a full-size, molded, tractor-style seat top for ergonomic comfort.
$199.99
Airlift thrones are the next evolution in DW throne technology.
$349.99
Airlift thrones are the next evolution in DW throne technology.
$369.99
This round top has a full 14″ round seat made of a special combination of foam for stability and comfort.
$279.99
This round top has a full 14″ round seat made of a special combination of foam for stability and comfort.
$279.99
Features a 14″ tractor top with a combination of foam for stability and comfort.
$319.99
Hard transparent plastic protective lid for ultimate protection. Fits Elektron Tonverk.
$55
The official ESP hard shell form fit case. A larger version of the CEXFF, this fits the LTD EXL-200 guitar.
$205
$199
If you're ready to start playing bass, the LTD B Series Bass Pack from ESP contains everything you need to get into the world of bass playing. No matter what musical style you want to pursue, from metal to funk, reggae to punk, this is your starting point on the road to greatness! It includes an LTD B Series bass with a powerful ESP bass pickup and volume/tone controls. You also get a 15W bass amplifier with 4-band EQ controls to dial in your preferred tone, and a headphone output for practice. Perfect for lessons and jams with friends, the LTD B Series Bass Pack also includes an electronic tuner, a 10' guitar cable, a nylon gig bag, and even a bass strap and picks! Whether you're playing for fun or for creative expression, this is the only affordable all-in-one bass pack with the quality, sound, and playability people expect from ESP!
The LTD EC Series Guitar Pack from ESP is everything you need to get started on electric guitar! Inside the box, you get an LTD EC guitar with two great-sounding ESP humbucking pickups. You get a 10W guitar amplifier with 3-band EQ and a headphone output for practice. There's an electronic tuner to make it easy to keep your new guitar in tune and sounding great. As if that wasn't enough, you also get a 10' guitar cable, a nylon gig bag to carry your guitar to lessons or jams with friends, a guitar strap, and even some picks. For beginning guitarists, the LTD EC Series Guitar Pack is your affordable entry point into the world of becoming a serious musician, with the quality and tone you need for inspiration and fun!
This starter package provides everything needed to begin playing electric guitar. The offering includes an LTD M Series instrument equipped with dual ESP humbucking pickups, a 10W amplifier with 3-band EQ and headphone connectivity, an electronic tuner, a 10-foot cable, nylon gig bag, guitar strap, and picks.
Restore your EVH 5150 100-watt head's footswitch functionality with a genuine replacement EVH footswitch. This 4-button footswitch allows you to quickly toggle between the channels and engage the effects loop.
$259.99
Restore your EVH® 5150® 50-watt combo's footswitch functionality with a genuine replacement EVH footswitch. This 4-button footswitch allows you to quickly toggle between the channels and engage the effects loop.
$209.99
$40.99
Super-tough, multi-panel amp and cabinet covers, made from highly durable material to withstand the rigors of the road. Black with embroidered EVH® logo.
$63.99
The power tubes used in all EVH® 5150III® 6L6 amps amps are finally available for everyone! The tube kit includes one pair of premium matched 6L6 tubes with EVH® graphics. Professional installation recommended.
$124.99
The highly sought after pot previously only available on the Wolfgang USA guitar is now available to everyone.
$13.99
The EVH D-Tuna® is a unique patented device that enables players to drop the E to D and back, in an instant. D-Tuna has been standard equipment on Eddie Van Halen's personal guitars as well as signature series locking tremolo-equipped guitars since the early 90's. Since then thousands of D-Tuna's have been sold all over the world. D-Tuna is proud to be endorsed by many professional players such as Warren DeMartini (RATT), Michael Wilton (Queensryche) and Dave "The Snake" Sabo (Skid Row) just to name a few. Bottom line...It's simple to use and it works.
$59.95
These ECC83 / 12AX7 tubes are the same ones used in all EVH® branded amplifiers. These are perfect for maintaining your EVH amp, or an easy modification for another tube amp. Includes 2 tubes.
$74.99
The power tubes used on all EVH® 5150III® EL34 amplifiers are finally available to everyone! The tube kit includes one pair of premium matched EL34 tubes with EVH® graphics. Professional installation recommended.
$134.99
The EVH® Frankenstein™ Classic humbucking pickup takes inspiration from Eddie's original PAF pickup that he loaded into the first incarnation of the black and white super Strat®, as pictured in 1978 on the cover of the first Van Halen album. Personally designed by Eddie himself, ironically this unique pickup features 5150 winds!
$229.99
Think of this pickup as a brand-new version of the original Frankenstein's battle-worn guitar pickup, wound to the exact original specs and built to fit in any humbucking-pickup-equipped guitar. One of the most famous humbuckers of all time is now available at a competitive price and serves as a great upgrade and alternative to the popular crop of cliché replacement humbuckers.
$179.99
$229.99
At last, the exact same reflectors used on the EVH® Frankenstein™ are now available to everyone! This set includes four round red reflectors, two orange round reflectors and two oval orange reflectors. These make a great addition to any EVH® guitar.
$49.99
The best way to transport or store your EVH® Stripe Series guitar is with this case! It features a red plush molded interior. A single storage compartment is perfect for straps, cables, picks, or any other accessories. The exterior features molded stripes, an EVH® logo, and durable TSA latches.
$249.99
Transport and store your EVH® Wolfgang® guitar with confidence in this ABS molded case, featuring molded stripes, an EVH® logo, and durable fiberglass reinforced large nylon trigger release latches. The rigid EPS foam interior with high-grade plush interior lining create the ultimate in instrument protection while a single storage compartment is perfect for straps, cables, picks, or any other accessories. Combining advanced materials with a TSA-accepted locking center latch, this case will help your guitar arrive at its destination unharmed.
$249.99
Sling your guitar over your shoulder with total performance reliability, versatile sizing and pure arena-rock attitude in mind. The EVH Nylon Adjustable Guitar Strap delivers the same stylish vibe of all EVH accessories but is now constructed with black nylon for ultimate durability during the most strenuous stage shows. The quick-adjust hook-and-loop fasteners allow players to switch up the sizing of the strap with ease. It also offers extended sizing options (42" - 72"), guaranteeing a comfortable and secure fit for any musician.
$46.99
The EVH Premium Quality adjustable guitar strap lets you comfortably sling that guitar over your shoulder in big-rock EVH style. Available in 42", which is adjustable to 50" and 56" which is adjustable to 62". Leather hook-and-loop fasteners keep it secured to your guitar.
$68.99
Our EVH Premium Guitar Picks were hand selected by Eddie from thousands of picks he's used over the years. These nylon picks feature a non-slip grip surface, the classic EVH logo, and a comfortably rounded tip that's just right for shredding. Sold in packs of 12, the picks come in a collectable tin that features the EVH logo and images of Eddie Van Halen's famous Frankenstein guitar.
$19.99
Slap these sweet-sounding, smooth-feeling babies on your guitar and you better believe you're in for unbelievably great tone. With the EVH name on it, you know you can depend on it.
$7.99
This EVH® case features a silkscreened logo on the lid, a molded green interior, internal storage compartment, and 3 chrome latches. A perfect fit for your Shark!
$199.99
With a Dunlop Max-Grip™ molded grip pattern, EVH Signature Series Picks are the perfect solution for fleet-fingered players looking to achieve perfect precision and speed. Each pick features a special non-slip surface, ensuring a firm grip and maximum control for strummers and shredders alike. The picks are available in four classic color combinations as well an expanded selection of gauges (.60mm - 1.0mm), making them well suited to every player's preference.
$6.99
The Star Gig Bag features durable and stylish design. A water resistant polyester, 600 denier exterior with 20 mm thick premium foam internal padding and a red plush interior to keep your instrument well protected. Features include one large external pocket and includes padded backpack style shoulder straps with a compartment to hide the straps in when they aren't used.
$79.99
Protect your investment without breaking the bank with this EVH® Star/Shark Economy Gig Bag! It features an EVH® logo on the outside, with plenty of storage space. Back straps included.
$39.99
Finally, the same strap setup used by Eddie Van Halen is available to everyone! This clasp set works with any EVH® branded strap. It also includes 2 eye hooks to replace your strap buttons. Professional installation is recommended.
$44.99
$149.99
EVH Wolfgang humbuckers with alnico 2 magnets are hotter and harness Eddie's scorching signature lead tone that captivated the world of rock 'n' roll in the '70s and '80s. These pickups deliver rich harmonics, cutting highs and snarling mids in spades.
$179.99
EVH Wolfgang humbuckers with alnico 2 magnets are hotter and harness Eddie's scorching signature lead tone that captivated the world of rock 'n' roll in the '70s and '80s. These pickups deliver rich harmonics, cutting highs and snarling mids in spades.
$179.99
Protect your investment without breaking the bank with this EVH® Wolfgang®/Striped Series Economy Gig Bag! It features an EVH® logo, external storage compartments, top-mount handle and back straps.
$74.99
Repair and restore your instrument like a professional. The EVH® Work Station features a finish-safe neoprene pad, textured anti-slip bottom grip, and padded neck cradle to hold your guitar at the proper angle for maintenance and adjustment. Crafted from durable EVA foam, the mat rolls up for quick and easy storage or on-the-go routine repairs. Along with offering stable reinforcement during any repair, the neck cradle doubles as a storage compartment and also rolls up for quick and easy storage.
$49.99
Optional replacement ear pads for Fostex RP-series headphones (such as the T50RPmk4) designed to improve wearing comfort and deliver smooth, high-quality sound across the bass-to-treble range. The exterior uses Ultrasuede (a registered trademark of Toray Industries, Inc.) for a soft, high-quality texture with excellent durability. Low-rebound cushions of optimized thickness help prevent steaming and fatigue during extended listening sessions, providing premium, fatigue-free wear.
Replacement ear pads for T60RP/T60RPmk2 & T50RPmk4 Series (pair). For T60RP, T60RPmk2, T50RPmk4.
Sound board that further brings out the acoustic performance of compact speakers. The SB100 can be installed without suppressing the resonance of the bottom surface, as if the speaker system were floating, thanks to the composite structure of aluminum and EVA sponge feet placed at the four corners of the top surface. The bottom surface is also entirely finished with EVA sponge to prevent rattling during installation and to insulate the speaker system from vibrations, enabling a more natural sound field reproduction.
SN04 is a speaker grille designed specifically for use with the NF04R active speaker. It protects the speaker unit placed in front. Uses a high-precision molded plastic frame with a high-strength steel perforated grille, internal cushioning to prevent rattling, and tool-free (screwless) attachment and detachment. Suitable for relay sites, halls, and other audio equipment applications.
For audio professionals using Audio-over-IP (AoIP) connectivity, the Genelec 9401A System Management Device enables the smooth integration of Smart Active Monitors and Subwoofers (SAM™) into SAM system layouts, from stereo to immersive, using ST2110, AES67 and Ravenna streams as the source – while offering full support for room adaption from our powerful Genelec Loudspeaker Manager (GLM™) software.
The Genelec GLM Calibration Kit enables Smart Active Monitors and Subwoofers (SAM™) to work with Genelec Loudspeaker Manager (GLM™), our award-winning monitoring calibration and management software offering precise automatic room adaption, advanced system control and highly detailed GRADE Room Acoustic Reporting.
User-replaceable stylus from the Joseph Grado Signature 8MZ cartridge. Compatible with all Grado Prestige Series cartridges.
$200
Consumer replaceable genuine Grado ear cushions, standard equipment for Signature S750 and S550.
$60
Sieveking Sound Omega wood headphone stand in cherry, made in Germany from a single piece of steam-molded wood with a matte lacquer finish.
$199
User-replaceable stylus for the Grado Prestige DJ200i phono cartridge.
$195
Genuine Grado foam ear cushions, standard equipment for SR225, SR325, and Hemp headphones.
$30
Consumer replaceable genuine Grado ear cushions, larger size for enhanced comfort and fit.
$60
User-replaceable stylus for the Grado Prestige Gold3 phono cartridge.
$160
User-replaceable stylus for the Grado Prestige Green3 phono cartridge.
$80
Original manufacturer replacement parts for the Grado GT220 true wireless earbuds and charging case.
$75
Consumer replaceable genuine Grado ear cushions designed for iGrado and eGrado headphones.
$9
Genuine Grado ear cushions, standard equipment for RS1, RS2, and PS500 headphones.
$30
$59.95
User-replaceable stylus from the Joseph Grado Signature MCZ cartridge. An upgrade from the 8MZ stylus and compatible with all Grado Prestige Series cartridges.
$240
Hard-shell zipper case with embossed Grado logo for protecting Grado headphones
$49.95
User-replaceable stylus for the Grado Prestige Mono ME+ (4E-MEPC) phono cartridge.
$140
User-replaceable stylus for the Grado Prestige Red3 phono cartridge.
$110
User-replaceable stylus from the Joseph Grado Signature XTZ cartridge. An upgrade from the TLZ stylus and compatible with all Grado Prestige Series cartridges.
$475
Consumer replaceable genuine Grado ear cushions compatible with SR60, SR80, SR125 and all Prestige, Reference, Statement, Professional and Limited Edition Headphones.
$15
A crush-proof clamshell case for in-ear headphones with pocket-sized portability and secure protection.
$19.95
User-replaceable stylus from the Joseph Grado Signature TLZ cartridge. An upgrade from the MCZ stylus and compatible with all Grado Prestige Series cartridges.
$325
$15
Sieveking Sound Omega wood headphone stand in walnut, made from real wood with a sturdy design that protects and displays headphones.
$199
Hand-crafted solid wood storage box for Grado headphones with golden oak stain, clear satin lacquer finish, and dovetail joinery.
$165
Sieveking Sound Omega wood headphone stand in zebrano, made from real wood with a sumptuous finish that protects and displays headphones.
$199
$249
$399
Wall mounting bracket for LSX II speakers with integrated cable management, 40° downward tilt, and 90° sideways rotation. Sold as a pair.
$249.99
Wall mounting bracket for KEF Q3 Meta and Q1 Meta speakers enabling near-flush mounting. Screws directly onto the rear of the speaker; includes a rubber protective bar. Sold as a pair.
$99.99
Remote control for LS Wireless Speakers featuring an aluminium top plate with backlit buttons and a customizable Favourite button. Operates via InfraRed technology without requiring speaker pairing.
$129.99
Black cloth grille with magnetic fixings for compatible Ci-Reference and Ci-R Series in-wall speakers. Available in two sizes to cover Ci-Reference (Ci3160/Ci5160REFM) or Ci-R Series models.
$149.99
Passive transformer that merges left and right stereo channels from an amplifier into a single speaker feed. Designed for rooms where only one speaker can be installed.
$149.99
Aluminium stacking kit that allows up to three KC92 subwoofers to be merged into a single vertical unit via threaded inserts. Increases maximum output without additional floor space.
$199.99
The KW1 comprises a wireless transmitter and receiver enabling cable-free audio transmission to KEF subwoofers. Allows KEF subs to be optimally placed without cable constraints. Compatible with Kube, KC62, and KC92 subwoofers, as well as LSX II LT, LSX II, LS50 Wireless II, and LS60 Wireless speakers.
$249.99
A wireless adapter that receives signals from the XIO Soundbar and transmits them to subwoofers, connecting to KEF subwoofers via proprietary pins or to third-party subwoofers through Aux/Optical outputs. Enables flexible subwoofer placement without cable constraints.
$199.99
Hard-shell carrying case for the Mu7 headphones. Protects the headphones during travel and storage.
$49.99
Leatherette memory foam replacement ear cushions for the Mu7 headphones. Conforms to head shape to enhance passive and active noise cancellation and improve bass response.
$49.99
Die-cast aluminum desk pad designed for use with LSX II or LSX II LT speakers as a desktop loudspeaker stand. Features a 10-degree upward tilt to angle speakers toward the listening position. Compatible with 1/4" screw mounting. Sold as a pair.
$229.99
Spike kit engineered to offer superb cabinet rigidity and stability, enabling optimal positioning of floorstanding Q Series speakers. Enhances vibration isolation and reduces resonance to improve sound quality, with adjustable elements for easy leveling.
$99.99
A neat black cloth grille to cover the drive units on KEF Q Series loudspeakers. Features magnetic fixings for simple attachment and removal, offering a clean appearance while concealing speaker drivers. Available for Q150, Q350, Q550, Q650c, Q750, and Q950 models.
$59.98
Magnetic grilles for KEF Reference Series speakers, with individual dedicated grilles for each driver. Available for Reference 1, 2c, 3, 4c, and 5 models in black cloth.
$349.99
Dedicated floor stand for the Reference 1 Meta speakers with integrated cable management. Sold as a pair.
$1,499.99
Floor stand for LSX II and LSX II LT wireless speakers with integrated cable management and a fillable aluminium pillar. Adjustable feet and 1/4" screw mounting; sold as a pair.
$399.99
Floor stand for KEF LS50 Meta and LS50 Wireless II with a fillable aluminium tube structure, steel plate base, and integrated cable management. Sold as a pair.
$499.99
Aluminum floor stand engineered for the R3 Meta bookshelf speakers, with integrated cable management and a fillable design for enhanced stability. Sold as a pair in three finishes.
$799.99
Floor stand designed for KEF's Coda W and Q Series speakers, featuring aluminum construction for rigidity and integrated cable management. Can be filled with inert material for enhanced stability and optimal speaker positioning.
$399.99
Metal rear enclosures (back boxes) for KEF Ci in-wall and in-ceiling speakers. Provides a sealed enclosure and reduces sound transmission to adjacent rooms during new construction installation.
$179.99
Steel rough-in frames (new construction brackets) for KEF Ci in-wall and in-ceiling speakers. Allow contractors to reserve space and simplify cutting during pre-wiring; 13 models covering square, round, and rectangular cutouts. Sold per pair.
$39.99
An elegantly designed floor stand engineered for T Series satellite speakers. Features the Selecta-mount system that automatically balances positioning while adjusting bass output based on placement without sacrificing audio fidelity. Internally wired design. Sold as a pair.
$399.99
Wall fixture for the Marantz Horizon Wireless Speaker. Designed to elevate luxury, the Horizon Wall Mount expands the ways you can enjoy your Marantz Horizon listening experience, securely mounting your wireless speaker while keeping the look elegant and discreet.
Premium CD Player Powered by HEOS with Custom HDAM. A high-end digital source player designed for experienced audiophiles. The device supports multiple audio formats and integrates network streaming capabilities via HEOS technology. Sound Master tuning ensures refined musicality and detail retrieval across all supported formats.
$3,500
DLIO-BP is a blanking plate for use with the I/O expansion slots in Midas PRO3, PRO6, PRO9 and PRO X digital console control centres and DL351 and DL451 modular I/O stage boxes. It covers unused card slot positions and shares the same front panel form factor as DL441, DL442, DL443, DL444, and DL452 I/O cards.
PRO SERIES PRO FADER (200 mm). Not satisfied with the existing motorised fader choices in the marketplace, Midas created the PRO FADER, rated for up to a million cycles - replacement motorised fader for use in Midas PRO Series consoles.
Not satisfied with the existing motorised fader choices in the marketplace, Midas created the PRO FADER, rated for up to a million cycles – three times that of other leading manufacturers - and providing high linearity, robustness, and smooth feel during operation. This decision yielded many other benefits, including total quality control over the manufacturing process and lower costs that could be passed on to customers. As a digital console manufacturer, Midas has a perspective on the actual application of motor faders that a component manufacturer would not have. The multi-disciplinary development project combined mechanical design, electronic hardware and software optimisation with a rigorous testing programme and an investment in material science to produce the best possible performance in actual operation in Midas PRO Series consoles. Semi-precious metals are used for the wiper fingers for their hard-wearing properties, and precision resistive tracks were created that offer highly linear positional accuracy, coupled with long-term durability and even response in use. PRO FADER (550 mm) features a high precision 100 mm travel track with a 10 kΩ linear law, ideally suited to servo control applications. The integrated touch sensing track and conductive T-Bar allow both the implementation of automatic channel selection in software, as well as detection of when the fader is being held so that the motor is not driven. PRO FADER (550 mm) is designed to be mounted to console fascia panels via its two M3 threaded pillars which are on 120 mm mounting centres. A 550 mm long cable is provided which includes connections for the 10 kΩ resistive track, the touch sensing track and the motor. PRO FADER (550 mm) is supplied as a set of five faders and is specifically intended for use in the centre sections of Midas PRO3, PRO6, PRO9 and PRO X Series control centres. PRO FADER (550 mm) is also a replacement for industry standard parts such as Penny+Giles PGFM3200, Alps K-Fader and other similar 100 mm motorised faders.
PRO LCD SWITCH enables dynamic and context-sensitive user interfaces, providing clear visual feedback of assigned functions and user-created labelling of mixing console channel, bus and group selections. The high contrast FSTN LCD glass with 36 x 24 pixel resolution allows immediate at-a-glance indication over a very wide viewing angle, and the tactile response of the momentary switch action provides confidence that the switch has been pressed, essential when the mix engineer's eyes are on the stage, not the console. PRO LCD SWITCH provides the key user interface functionality for the Midas console VCA and POPulation group navigation system, which mirrors the natural workflows used by mix engineers. The RGB LED backlight offers high visibility in all lighting conditions, and the colour coding offered by the 8 distinct displayable LED colours encourages the development of a mental picture, or “Mind Map”, of the whole console system. The flexibility of PRO LCD SWITCH ensures only the required control elements and associated visual feedback are presented, allowing users to adopt structured task-based workflows. PRO LCD SWITCH is suitable for use in all Midas XL8 and PRO SERIES digital consoles and control centres, including as a replacement for the Screenkeys RGB24T LCD switch.
Touring grade road case for the Midas PRO3, PRO6, PRO9 and PRO X Live Digital Console control centres, designed to withstand the rigours of live concert tours. Constructed from 12 mm thick rigid marine grade plywood with 40 x 40 mm durable aluminium edging extrusions. Dual load-bearing spigots couple the weight of the console chassis directly into the road case, and composite density foam provides internal support and superior protection in transit. Features premium Penn-Elcom castors and RK handles, and ships with a removable protective pallet that allows the road case to be stored and shipped on its side.
Custom protective case for the CDMIX series of mobile DJ systems, featuring a sturdy carry handle, a removable lid for performance while in the case, and locking latches for security.
Collapsible, wall-mountable laptop performance stand for DJs and producers, with rubber grips for secure placement and a zippered carrying case for transport.
Hard case for the Mixdeck Express, with rugged nickel-plated latches and reinforced corners for maximum protection between gigs.
Protective case for Numark Mixtrack series DJ controllers. Clamshell design with a padded, foam-lined interior and a slot for headphones and cables.
Coffin-style heavy-duty flight case built for the NS7 and NS7II controllers, with metal reinforcement, foam padding, wheels, a handle, and removable panels for performing with the unit in the case.
Three-screen display add-on that upgrades the NS7II controller with three 4.3-inch full-color screens for real-time Serato DJ waveform and library feedback, matching the NS7III.
Coffin-style, heavy-duty flight case designed specifically for the NS7III, the Numark performance controller for Serato DJ software.
The Revival Footswitch gives you access to two hidden features of the RevivalDRIVE line, letting you switch in the Mid Boost and Blend Override functions on the fly while on stage.
£82.50
Using the Switcher Interface it is possible to remotely toggle the active Channel, Bypass state, Mid Engage, and Blend Override functions of the RevivalDRIVE, allowing instant recall of presets with different combinations of Channels, Mid Boosts, Blended Overdrive, or bypass.
£124.17
DJ controller bag for the DDJ-FLX4, DDJ-SB3, DDJ-SB2, DDJ-SB, DDJ-400 and DDJ-WeGO3
$179
$65
$39
$39
$39
$39
$39
$29
$35
$41
$38
$34
$73
$42
$42
$39
$60
$47
$47
$47
$26
$55
Optional expansion module (HDSP Synchronization Module) for selected RME HDSPe cards that adds synchronization to LTC (Linear Time Code) and video signals. Connects to the host card via ribbon cable and uses SteadyClock technology to extract clean, low-jitter word clock from LTC and video sources, enabling sample-accurate timecode synchronization.
Expansion option cards for the Si range of digital consoles, enabling interface with analogue and digital systems and expanding I/O count beyond standard console configuration.
Optional interface cards for Vi Series consoles, enabling direct interface with a wide range of other systems and audio networks using industry standard protocols.
An accessory kit combining a sealing cover (CC-A1) and ear chips (ET-A1) designed to make STAX in-the-ear earspeakers suitable for outdoor use by suppressing sound leakage while maintaining sound quality. The asymmetrical design and variable-elasticity ear pieces improve fit and comfort.
16-In/16-Out AES/EBU expansion card for TASCAM's expansion slot system. Features a built-in sampling rate converter per input pair supporting 32kHz–192kHz, with two D-sub 25-pin connectors conforming to AES59-2012 standard. Compatible with TASCAM Sonicview 24XP, Sonicview 16XP, DA-6400, and DA-6400dp.
16-channel analog output expansion card for TASCAM's expansion slot system. Provides two D-sub 25-pin balanced connectors (8 channels each) with per-channel output attenuation of 0 to -14 dB in 0.5 dB increments. Compatible with Sonicview 24XP, Sonicview 16XP, DA-6400, and DA-6400dp.
Upload your music to over 150+ stores around the globe in a few clicks. No middle man monetization - you get 100% of 100% of your royalties.
$9.99
This catalog is open source. View or improve the data on GitHub. View on GitHub