Miktek

The Miktek C5 is a pencil condenser microphone for critical recording of acoustic instruments. It uses an MK5a 0.5-inch cardioid capsule with a gold-evaporated Mylar diaphragm for a super-linear, full-bodied response.

The Miktek C5MP is a pencil condenser microphone kit with an MK5a cardioid capsule and included MK5bMP matched-pair omni capsules for critical recording of acoustic instruments.

The Miktek C7e is a multi-pattern, large-diaphragm FET condenser microphone offering cardioid, omni and bidirectional patterns, with a high-pass filter and -10dB pad for loud sound sources.

The Miktek CV3 is a large-diaphragm tube condenser microphone with nine selectable pickup patterns, offering a big, warm bottom end and airy high frequency response suited to vocals, acoustic instruments and drum overheads.

The Miktek CV4 is a large-diaphragm tube condenser microphone with nine selectable pickup patterns, offering a big, warm bottom end and airy high frequency response suited to vocals, acoustic instruments and drum overheads.

The Miktek MK300 is a large-diaphragm FET condenser microphone with switchable cardioid, bidirectional and omnidirectional patterns, plus a 100Hz high-pass filter and -10dB pad.

A handheld condenser microphone with a half-inch super cardioid capsule and AMI transformer, delivering clarity and sensitivity for professional audio recording.

A shockmount accessory for the MK300 microphone.

A shock-mount for the CV4, C7, CV3 and C1 condenser microphones.

A shockmount for the C7e, CV3 and C1 condenser microphones.

A shockmount for the C5 pencil condenser microphone.

A microphone designed for use on snare drums and toms.

A microphone designed for use on kick drums.

A dynamic handheld supercardioid microphone.

A tube microphone power supply designed for the CV4 and CV3 tube microphones.

An XY stereo mounting bar used to mount two microphones for XY stereo recording.

An output transformer replacement part for the C1, C7e and CV3 microphones.

The DH80 is a semi-open dynamic reference headphone with 40mm neodymium drivers, offering a 10Hz-20kHz frequency response and 68 ohm impedance.

A super cardioid dynamic microphone with a custom neodymium capsule designed for clear reproduction of low toms, acoustic bass, and kick drum.

A swivel mount microphone holder for the C1, C7, C7e and CV4 microphones.

A super cardioid dynamic microphone with a custom neodymium capsule offering clear, articulate sound reproduction contoured for snare and tom-toms. Its labyrinth design provides rear rejection and gain before feedback, making it suitable for congas, timbales, and other percussion.

A dual-channel, Class A microphone preamplifier with a pristine signal path and linear response. It offers 70dB of gain, variable impedance selection, 48-volt phantom power, and a high-pass filter.

A USB studio condenser microphone with a large diaphragm, side-address design, built-in analog to digital converter, and both USB and XLR outputs for simultaneous recording and sound reinforcement use. It includes a headphone output for monitoring computer playback.

A handheld dynamic microphone with a super cardioid pickup pattern and custom AMI transformer, delivering exceptional sound quality while minimizing handling noise.

A windscreen accessory for the C5 microphone.