The BE-100 Deluxe is a hand-wired three channel, 100 watt all-tube guitar head built around Dave Friedman's BE circuit. It adds a Smallbox-inspired plexi clean channel, separate gain and master controls for the BE and HBE channels, and power section tone shaping through response, frequency and thump controls.
The BE-50 Deluxe is a hand-wired three channel, 50 watt all-tube guitar head combining Dave Friedman's BE and HBE drive circuits with a clean channel inspired by the Buxom Betty. A switchable power section runs at 50 watts pentode or 25 watts triode, with presence, thump and response controls shaping the power amp.
The BE-Mini is a compact 30 watt guitar head pairing Dave Friedman's BE preamp circuit with a travel-friendly chassis. Gain, level, three band EQ, presence, Cut and Tight switches and a series effects loop give it the British-voiced high gain of the BE-100 in four pounds.
The Butterslax is Bill Kelliher's signature Friedman head, a hand-wired 100 watt three channel amp powered by four EL34s. Each channel steps up the gain, with global presence and thump controls, a line out with level and an ultra transparent series effects loop.
A 40 watt single channel all-valve guitar head voiced for vintage classic rock, inspired by British valve amps of the 1960s and 1970s. It runs a pair of 5881 power valves into a modified JTM 45 style circuit with an ultra-transparent series effects loop.
An open-back 1x12 inch, 40 watt single channel all-valve combo voiced for vintage classic rock. It pairs the modified JTM 45 style Dirty Shirley circuit with a 16 ohm Celestion G12H Redback speaker.
The Jake E Lee signature 20-watt all-tube head, a two-channel EL84 amplifier with an internal load and a cab-simulated XLR output for silent recording.
A 100-watt EL34-powered all-tube head built as a tribute to Jose Arredondo's amplifier modifications, with a three-way Gain Style switch, a Fat switch and dual switchable Presence controls.
A 20-watt all-tube 1x12 combo loaded with a Celestion G12M-65 Creamback, bringing the hot-rodded British high-gain voice of the Friedman JOSE 100 into a grab-and-go format.
A 20-watt all-tube head that brings the hot-rodded British high-gain voice of the Friedman JOSE 100 into a compact format, with internally bridged volumes and a three-position Gain Style switch.
The Little Sister is a 20-watt, EL84 powered, single channel 1x12 inch combo based on its 40-watt predecessor. It is voiced for the vintage classic rock tones of British tube amps from the 1960s and 1970s.
The Little Sister is a 20-watt, EL84 powered, single channel head based on its 40-watt predecessor. It is voiced for the classic rock tones of British tube amps from the 1960s and 1970s.
The Phil X Signature is a hand-wired, single channel 100-watt head powered by four EL34s, built with session guitarist Phil X. A foot-switchable solo boost, a gain structure switch, a line out and an ultra transparent series effects loop round out the panel.
The Pink Taco V2 Combo is a hand-wired, 20-watt, EL84 powered single channel 1x12 inch combo that puts the Friedman BE-100 sound in a small, lightweight format.
The Plex is a 50-watt, two-channel, EL34-powered head that recreates Dave Friedman's 1968 JMP Super Lead. It is the first model in the Friedman Vintage Collection.
The Runt-20 is a 20-watt, two-channel all-tube head driven by two EL84s. An internal load and a cabinet-simulated XLR output let it be played and recorded with no speaker cabinet connected.
The Runt-20 Combo is a 20-watt, two-channel all-tube 1x12 inch combo driven by two EL84s. An internal load and a cabinet-simulated XLR output let it be played and recorded with no speaker cabinet connected.
The Runt-50 Combo is a versatile 50-watt, two-channel all-tube 1x12 inch combo driven by two EL34s, with a cabinet-simulated XLR output for front of house or studio use.
A hand-wired 50 watt all-tube two channel 1x12 combo loaded with a Celestion G12H Redback, running from classic plexi cleans to Friedman's modern high gain voice.
A hand-wired 50 watt all-tube two channel head, the first channel running from clean through crunch to full plexi roar and the second carrying the modern high gain tone Friedman is known for.
The second generation of Friedman's Steve Stevens signature head, a hand-wired 100 watt all-tube three channel amplifier in a redesigned blacked-out Baltic Birch shell.
A 40-watt, 5881 powered, dual channel hand-wired 1x12 combo based on a modified JTM 45. The tongue and groove Baltic Birch cabinet houses a 16 ohm, 12 inch Celestion G12H Redback speaker rated at 150 watts.
A 40-watt, 5881 powered, dual channel hand-wired head based on a modified JTM 45, voiced for the British tone Friedman is known for. Both channels share the same circuit, from sparkling cleans through vintage crunch.
A 30-watt all-tube 2x12 Vintage Series combo loaded with two Celestion Alnico Blue speakers, built on four EL84s and a 5AR4 rectifier. A Brilliant top boost channel and a Normal channel with a three-position Voice switch run in phase so they can be blended.
A 30-watt all-tube Vintage Series head built on four EL84s and a 5AR4 rectifier, with a Brilliant top boost channel and a Normal channel carrying a three-position Voice switch. Both channels run in phase so they can be blended.
The Friedman Buffer Bay is a pedalboard patch bay with a switchable transparent buffer. It carries five 1/4 inch TRS pass-through connections, a buffered TS connection and a MIDI thru, and mounts on any pedal board or into a Friedman branded one.
The original Friedman two-button footswitch for channel switching on two channel amps, supplied with its cable. LED indicators show which channel is selected.
A single button footswitch with an LED indicator, supplied with its cable, for remote channel switching on Friedman's JJ-Junior, Runt-20, Runt-50, Smallbox, Twin Sister and JJ-100 amplifiers.
A 13 by 17 inch two-tier pedal board made in the USA, with a flat bottom tier, an angled top tier drilled for cable routing and a detachable riser for a wah or volume pedal.
A 15 by 20 inch two-tier pedal board made in the USA, with a flat bottom tier, an angled top tier drilled for cable routing and a detachable riser for a wah or volume pedal.
A 15 by 24 inch two-tier pedal board made in the USA, with a flat bottom tier, an angled top tier drilled for cable routing and a detachable riser for a wah or volume pedal.
A 15 by 29 inch two-tier pedal board made in the USA, with a flat bottom section, an angled top section and cable routing holes throughout. It ships with a detachable riser for wah and volume pedals.
A 15 by 42 inch two-tier pedal board made in the USA, with a flat bottom section, an angled top section and cable routing holes throughout. It ships with a detachable riser for wah and volume pedals.
A 4 by 7 inch metal riser that mounts on the flat bottom tier of a Friedman Tour Pro pedal board. It ships with mounting screws and fits the Tour Pro 1520, 1524, 1529 and 1542 only.
The Friedman 'Large' 1x12 is an open-back guitar cabinet loaded with a single Celestion G12H Redback. Tongue and groove Baltic Birch construction delivers the bass and mid response expected from a Friedman cab.
A compact closed-back, front-ported 1x12 inch guitar cabinet in tongue and groove Baltic Birch, loaded with a 16 ohm Celestion G12M-65 Creamback. It is sized for the studio and for stereo or wet/dry/wet rigs.
A closed-back 4x12 inch guitar cabinet in tongue and groove Baltic birch, loaded with a pair of Celestion G12M-25 Greenbacks over a pair of Celestion Vintage 30s. The mixed complement pairs Greenback warmth with V30 thump.
A large closed-back guitar cabinet in tongue and groove Baltic birch, loaded with a pair of 12 inch Celestion G12H-30 Anniversary speakers above a pair of 15 inch Celestion Fullbacks. It is aimed at Friedman's 100 watt heads.
A horizontal 2x12 closed-back, rear-ported guitar cabinet in tongue and groove Baltic birch, loaded with a pair of Celestion Vintage 30 speakers at 8 ohms.
A front-ported, closed-back 1x12 guitar cabinet in tongue and groove Baltic birch, loaded with a 16 ohm Celestion G12M-65 Creamback and finished to match the Jake E Lee 20 head.
A rear-ported, closed-back 2x12 extension cabinet in tongue and groove Baltic birch, loaded with a pair of Celestion G12M-65 Creambacks at 8 ohms and finished to match the Jake E Lee heads.
A vertical 2x12 guitar cabinet with a rear-ported, closed-back tongue and groove Baltic birch enclosure, loaded with two Celestion Vintage 30 speakers at a nominal 8 ohms.
An open back 2x12 extension cabinet loaded with two Celestion Alnico Blue speakers at a nominal 16 ohms, built to match the Vintage Series VX-30 head. The tongue and groove Baltic Birch enclosure is handcrafted in the USA.
The BE-OD is a compact overdrive pedal that captures the tone of the Friedman BE-100 amplifier. Volume, gain, tight, bass, treble and presence controls take it from lightly broken up overdrive to full high gain.
The BE-OD Deluxe is a dual channel overdrive pedal based on the Friedman BE-100 amplifier. Channel 1 matches the original BE-OD while Channel 2 is voiced with slightly lower gain, each with its own volume, gain, three band EQ, presence and three position tight switch.
An amp-in-a-box overdrive pedal carrying the control set and voice of the Friedman Dirty Shirley head. It works into a clean amp or as a dirty boost in front of an already driven one, with a side-mounted Tight switch for the low end.
A transparent, lower gain overdrive pedal designed to push an already overdriven amp into saturation, with a three-position high-frequency cut and a tri-mode clipping voice switch.
An overdrive pedal that carries the control set and voice of Friedman's Smallbox amplifier, from vintage plexi grit to high gain, with a side-mounted gain structure switch.
A bridge-position Friedman Classic humbucker built on Alnico 5 magnets. It is an amalgamation of vintage and modern humbucker tones, punchy and open with a hard rock modern edge.
A neck-position Friedman Classic humbucker built on Alnico 5 magnets. It is an amalgamation of vintage and modern humbucker tones, open and punchy with a hard rock modern edge.
A hotter-wound bridge humbucker in the Friedman Classic line, on Alnico 5 magnets. The extra output gives a slightly crunchier tone in higher gain settings while keeping articulate tonal clarity.
A modern high-output bridge humbucker wound to 16k, originally designed for the Friedman NoHo 24 guitar. Its sculpted open voice and midrange focus are meant to cut through a mix without sounding honky or nasally.
The Friedman ASC-10 is an ultra-compact 10 inch two-way active stage monitor voiced for guitar amp modelers and profilers such as the Fractal Audio Axe-Fx, Kemper Profiler and Line 6 HD Series. A bi-amped all-analog power section delivers 500 watts in a tilt-back guitar-cabinet enclosure.
The Friedman ASC-12 is a 12 inch two-way active stage monitor voiced for guitar amp modelers and profilers such as the Fractal Audio Axe-Fx, Kemper Profiler and Line 6 HD Series. A 500 watt bi-amped Class G power section drives a Celestion woofer and compression driver in a traditional guitar cabinet enclosure.
The Friedman ASM-10 is an ultra-compact 10 inch two-way active stage monitor voiced for guitar amp modelers and profilers such as the Fractal Audio Axe-Fx, Kemper Profiler and Line 6 HD Series. A bi-amped all-analog Class G power section delivers 500 watts into a tilt-back floor monitor cabinet.
The Friedman ASM-12 is a 12 inch two-way active stage monitor voiced for guitar amp modelers and profilers such as the Fractal Audio Axe-Fx, Kemper Profiler and Line 6 HD Series. A 500 watt bi-amped Class G amplifier drives a Celestion woofer and compression driver in a tilt-back Baltic birch cabinet.
A dual-channel all-tube preamp and DI pedal that puts an entire Friedman rig, with impulse response cabinet and power amp simulation, in a pedalboard-friendly package.
The Jake E Lee signature dual-channel all-tube preamp and DI pedal, built around the JEL-100 and JEL-20 voices with impulse response cabinet and power amp simulation on board.
A dual-channel all-tube preamp and DI pedal that takes a Friedman flagship voice from British cleans to high gain, with impulse response cabinet and power amp simulation on board.
A bridge-position Friedman Classic single coil on Alnico 3 magnets. It produces vintage single coil chime with a pronounced mid-range presence that cuts through the mix when gain is added.
A middle-position Friedman Classic single coil on Alnico 3 magnets, wound reverse-wound reverse-polarity for hum cancelling in the in-between switch positions.
A neck-position Friedman Classic single coil on Alnico 3 magnets. It produces vintage single coil chime with a pronounced mid-range presence that cuts through the mix when gain is added.
A bridge-position Friedman Classic 90 pickup inspired by the distinctive tones of the Golden Age of Rock 'n' Roll. It delivers vintage tone while maintaining a strong presence and a low noise floor.
A neck-position Friedman Classic 90 pickup inspired by the distinctive tones of the Golden Age of Rock 'n' Roll. It delivers vintage tone while maintaining a strong presence and a low noise floor.
The Buxom Boost is a clean boost pedal voiced after the Friedman Buxom Betty amp head. An active three band EQ, a Tight control and an EQ Bypass switch let it shape a solo tone or stay completely transparent.
The Sir-Compre is an optical compressor pedal with volume, treble, compression and tight controls, plus a wide-range gain knob that takes it from ultra-clean to semi-overdriven.
The MIC-NO-MO is a passive, all-analog guitar cabinet simulation DI box that removes the need for a microphone on the speaker cabinet. It sits between the amplifier and the speaker cab and sends a balanced, cabinet-simulated signal to a mixer or interface.
The Power Grid 10 is an isolated, high-current 9V pedal power supply with ten outputs and a universal 100-240Vac input. Its housing doubles as a riser, so pedals can be mounted on top of it.
A vintage-voiced wah pedal with a three-position sweep switch, adjustable treadle tension and a switchable internal buffer, so its feel and voice can be tuned to the player and the board.
This data is open source. View or improve this entry on GitHub. View on GitHub