Avalon Design
External AC power supply for Avalon Design units with 100V–240V selectable input. Dimensions 7 × 5 × 3.25 in (17.6 × 12.3 × 8.1 cm).
Power Conditioner
70 products
-
BAE Audio24V PSU
$350
Remote power supply unit designed to provide optimum sound quality for BAE audio preamps. Features hand-wired construction consistent with BAE standards, with a four-foot cable capable of delivering four times the current needed by the preamps. Convertible to 230, 240, 100, and 220VAC input voltages. Includes AC cable.
BAE AudioA hand-wired bi-polar power supply for 11-space racks, delivering ±16V @ 2.1A with 48V phantom power output.
BAE AudioA hand-wired bi-polar power supply for 6-space lunchbox or single/dual 19" rack configurations, delivering ±16V @ 1.6A with 48V phantom power output.
- Befaco
The Befaco Passive Bus is a passive Eurorack power distribution bus board that adds 14 IDC power connectors to an existing power supply, with no active components or voltage regulation. At only 10mm tall across its 41.6cm length, it fits inside cases with tight vertical clearance to expand module count without requiring an additional power supply.
- Befaco
The Befaco Power Bus is a regulated Eurorack power distribution board featuring linear regulators on each rail (+12V, -12V, and 5V), each capable of delivering up to 1.5A with minimum noise leakage. It provides 14 IDC 'Boxed' connectors for powering modules and includes faston blade connectors for daisy-chaining multiple units in larger systems. Designed and manufactured in Barcelona, it is available as a DIY kit.
- Befaco
The Trolley Bus is a 5A Eurorack power solution featuring 28 slots powered by four high-quality DC-DC converters, designed to handle modern power-hungry modules. It ships with a 135W power brick and uses horizontal connectors to maximize space efficiency in the case. The system includes a companion 4HP ON/OFF module with two USB-A charging ports and a power button, requiring no tools for installation.
Black Lion AudioPG-1 Type 1
A$499
Rackmount power conditioner for Australian/Chinese (Type I) 230V connections
Black Lion AudioPG-1 Type F mkII
€399
Studio-grade power conditioner and surge protector for Type F (Schuko) European/Russian markets
Black Lion AudioPG-2 Type 1
A$699
Professional 2U rackmount power conditioner for Australian/Chinese (Type I) 230V connections
Black Lion AudioPG-2 Type F
€499
Rackmount (3U) 12-output power conditioner featuring PG-99 Filtering Technology with premium Panasonic and Wima capacitors, designed for the European/Type F (Schuko) market.
Black Lion AudioPG-P Plus Type F
€149
Portable studio-grade power conditioner and surge protector with PG-P Filtering Technology
Black Lion AudioPG-P Type F
€85
The PG-P Type F is a portable studio-grade power conditioner and surge protector designed to eliminate electrical noise from musicians' equipment. It uses premium Panasonic capacitors to deliver the same noise filtering found in rack-mount power conditioners, in a portable form factor with six wall-wart spaced Schuko (Type F) outlets.
Black Lion AudioPortable studio-grade power conditioner and surge protector (Danish Type K)
Black Lion AudioPG-X
$119
Rackmount power conditioner with PG-90 Filtering Technology and surge protection
Black Lion AudioPG-X Type C
$150
Best-of-class 1U rackmount power conditioning for professionals on a budget
Black Lion AudioPG-XLM
$199
The PG-XLM is a rackmount power conditioner and surge protector featuring Black Lion Audio's PG-90 Filtering Technology, delivering an average of 90% noise filtering. It includes eight switched, filtered, and surge-protected rear outlets, a front convenience outlet, USB charging port, pull-out dimmable LED lights, and an LED voltage meter.
Black Lion AudioPG-XLM Type F
€219
Rackmount power conditioner/surge protector with light module and voltage meter
Death By AudioThe Power Your Pedals Crave Let's cut the noise—literally. Introducing Raw Power, the power supply built for the musicians who demand only the best for their pedalboard. It's cleaner. It's tougher. It's got enough juice to fuel a pedal army, and it works anywhere in the world. No compromises.
DIY Recording EquipmentA universal switch-mode external power supply that provides +/-16v and 48v phantom power for DIYRE rack-mount kits like the PR502, Colour Duo, and G Bus. A companion THRU cable allows daisy-chaining power to up to four units.
ElektronThe power supply is compatible with Tonverk. The product will be region specific depending on your shipping location.
Empress EffectsA universal 9V DC, 2.5A negative-tip wall power supply with more than enough current to power any Empress pedal. It ships with interchangeable plug adapters for outlets in North America, Europe, the UK, China and Australia/New Zealand.
FulltoneA regulated 9 volt, 300mA power supply with a positive-to-center 2.1mm plug designed for germanium devices like the Octafuzz, Soul-Bender, and 69 Pedal.
FulltoneA noise-free 800mA regulated 18VDC switching power supply designed for pedals, including older Deja'Vibe models that require higher current for optimal sound.
FulltoneA noise-free 800mA regulated 9VDC switching power supply designed for pedals, including older Deja'Vibe models that require higher current for optimal sound.
- Furman
M-8x2 Merit Series
Merit Series rack-mount power conditioner with eight outlets, surge protection, and EMI/RFI filtering for studio and stage equipment racks.
- Furman
P-1800 AR
Advanced voltage regulator and power conditioner that provides stable AC output and surge protection for sensitive studio equipment.
- Furman
PL-Plus DMC E
Classic Series rack-mount power conditioner with pull-out LED lights, voltmeter display, and SMP surge protection for professional audio racks.
- Furman
PL-Pro DMC E
Premium rack-mount power conditioner with linear filtering technology, voltmeter, ammeter, and pull-out LED light panel for touring rigs.
- Furman
SS2400 Power Sequencer
Rack-mount power sequencer that safely powers up and shuts down connected equipment in a controlled sequence to protect gear.
MasterSoundsLinearPOWER for Radius & Valve
£299.95
A linear power supply designed specifically for MasterSounds DJ mixers, using a hybrid discrete regulator design to improve fidelity, especially at lower frequencies. Output voltage can be preset to 15V, 18V, or 21V with over-temperature, short-circuit, and overvoltage protection.
MasterSoundsA medical-grade low ripple power supply suitable for the MasterSounds FX Unit, usable internationally with input between 100 and 230 volts, supplied with 4 interchangeable plug types.
MaxonPower-All Basic Kit
$29.95
A 9 VDC, 2000 milliamp digital power supply designed to power an entire guitar pedalboard from a single outlet, including a variety of jumper cables for different pedal power connector types.
Show all 70 products
MaxonA 9 VDC, 3000 mA regulated power supply meeting DOE Level VI energy efficiency standards, designed to provide ultra-quiet, high-current power to guitar effect pedals.
MaxonSingle Power Supply
$19.99
A high-current digital power supply offering 2000 milliamps of clean, regulated, noise-free power for guitar effect pedals, available in supply-only configuration.
- Middle Atlantic
PD-915R
Rack-mount power distribution unit with nine outlets, surge protection, and front-panel LED indicators for studio and broadcast equipment racks.
NumarkProfessional-grade surge-protected power strip for DJs with six AC outlets and an integrated four-port USB 3.0 hub.
RMELinear Super Low Noise Dual Audio Power Supply with µFilter and Sensor Technology. Compact half-rack linear power supply featuring two separately filtered DC outputs (Linear and µFilter), Sensor technology that measures voltage at the DC connector, a 30,000 µF capacitor bank with ferrite choke, HF and DC filters on the AC mains side, GND lift switch, multicolor status LEDs with AutoDark mode, and a 60 VA audio toroidal transformer with isolation winding.
RMELow Noise Isolating DC Filter, 12 Volt 2 Ampere, DC Input and Output. The LNI-2 DC provides isolation, regulation and filtering of output signals from any 12 volt DC power source, enabling a remarkable improvement in DC voltage stability while providing an ultra-clean 12V power source. The LNI-2 DC is based on two key features: galvanic isolation and RME's exclusive µFilter. Galvanic isolation is an advanced technique to prevent any noise, from hum over high frequency noise to leakage currents from reaching the filtered DC output. The µFilter (micron filter) of the LNI-2 DC consists of a discrete Ultra Low Noise linear regulator with extremely low noise output of only a few µV (micro-volt), soft start, thermal overload, short circuit protection and sensor technology. The LNI-2 DC handles power sources from 9–18V DC (input) and provides a fixed, perfect voltage of 12.0 V at 2 A at the lockable output socket.
- Singular Sound
9V Power Supply
$29.97
A 9V, center negative, 500mA power supply for powering guitar pedals, MIDI controllers, and instruments.
SonicwareA DC 9V / 1.8A wall power supply for the LIVEN and deconstruct series, with EIAJ3 center-positive plug and interchangeable multi-plug heads for USA, UK, EU, and Japan. Also compatible with KORG's volca series.
- TC Electronic
POWERPLUG 9
$23.90
Universal Power Supply for TC Electronic Products with Worldwide Power Adaptors
TC Electronic10-output isolated pedalboard power supply with multiple voltage and current options for powering a complete guitar or bass effects rig.
TC ElectronicUSB-C powered pedalboard power supply with multiple isolated 9V DC outputs for simultaneously powering effects without ground-loop noise.
TC ElectronicUSB-C powered extra-large pedalboard power supply with additional isolated 9V DC outputs for larger touring or studio pedalboards.
- Tripp Lite
Isobar Surge Protector
Isobar surge protector with isolated filter banks, diagnostic LEDs, and all-metal housing for protecting audio and video equipment.
- Tripp Lite
LC1200 Line Conditioner
Line conditioner that corrects brownouts and overvoltages while providing surge protection for rack-mount audio equipment.
Walrus AudioCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard.
Walrus AudioCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard.
Walrus AudioCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard.
Walrus AudioCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard.
Walrus AudioFor the power enthusiast or over-prepared. Replace your lost-at-the-gig-last-weekend Canvas Power Brick. Or just get a backup because you know one day you'll be that guy anyway.
Walrus AudioThe Canvas Power HP allows you to power the thirstiest of modelers and pedals with a massive 3A (three Amp, or 3,000mA) output. The HP also has 3 isolated power outputs delivering up to 500mA of clean power at 9v. The 3A output can also switch between 9V and 12V for powering high-voltage pedals.
- Walrus Audio
The Canvas Power HP Plus is a perfect power solution for hybrid rigs running pedals, modelers, and/or multi-effect pedals allowing you to power the thirstiest of pedals with two, 3A (three Amp, or 3,000mA) outputs.
This catalog is open source. View or improve the data on GitHub. View on GitHub