Di Box

22 products

REDDI All-Tube Direct Box
A-Designs
An all-tube direct box featuring a 6N1P tube, custom Cinemag output transformer, and a circuit topology inspired by the Ampeg B-15 bass amplifier, delivering warmth and harmonic character to direct signals.
REDDI V2 Dual-Channel All-Tube Direct Box
A-Designs
A dual-channel, all-tube direct box featuring custom-wound CineMag transformers in a 2RU rack chassis, combining two independent REDDI channels inspired by the Ampeg B-15 circuit for bass, stereo keyboards, and synthesizers.
TDI Duo
AEA Ribbon Mics
An ultra-transparent stereo active DI box with a Fred Forssell JFET circuit and Lehle step-down transformer, delivering high-quality direct injection with ten-megohm input impedance and a ground-lift switch for noise-free performance.
SCR-DI
Ampeg
The Ampeg SCR-DI Bass DI with Scrambler Bass Overdrive is a full-featured Ampeg preamp that delivers a wide range of tones. Classic Ampeg EQ with Ultra-Hi and Ultra-Lo filters combines with the distinctive grind of the Scrambler overdrive, plus extensive I/O for stage and studio.
205L Direct Input
API Audio
200-Series DI module with high-impedance instrument input for guitar and bass. Features tone shaping (Thin/Fat), Bright switch, 20 dB pad, and transformer-coupled output capable of reaching professional line levels.
505-DI Direct Input
API Audio
500 Series DI module for guitars, basses, and keyboards. Features 55 dB gain, Hi-Z front input, switchable 100K/400K load, passive two-band EQ (150 Hz / 8 kHz), BRIGHT switch, 20 dB pad, and transformer-coupled balanced output via API 2520/2510 op-amps.
U5
Avalon Design
The Avalon U5 is a pure Class A, 100% discrete instrument preamplifier and DI box featuring a passive six-position tone selector, variable gain preamp, dual balanced XLR outputs, and a headphone monitor output, accommodating electric and acoustic guitars, bass, keyboards, and 400W speaker-level sources.
PDI
BAE Audio
The BAE Audio PDI is a passive direct injection box featuring hand-wired construction and an OEP/Carnhill transformer. It converts instrument-level signals to balanced mic-level XLR output with a ground lift switch and a parallel through output.

$155
PDIS
BAE Audio
The BAE Audio PDIS is a passive stereo direct injection box with OEP/Carnhill transformers and hand-wired construction. It supports stereo or simultaneous dual mono operation with dual ground lift switches and Neutrik connectors throughout.

$260
db10
dbx
The dbx db10 is a passive direct injection box featuring a custom mu-metal-shielded transformer, gold-plated Neutrik XLR output, and a 3-way pad switch (0/20/40 dB) for handling instrument, line, and speaker-level signals. It provides transformer-isolated, balanced XLR output with a parallel thru jack for amp connection.
db12
dbx
The dbx db12 is a phantom-powered active direct injection box featuring a custom mu-metal-shielded transformer, gold-plated Neutrik XLR output, and a 3-way pad switch for handling instrument through speaker-level signals. A green LED phantom power indicator confirms active operation.
Di1
dbx
The dbx Di1 is a compact active direct injection box ideal for studios and live use, converting high-impedance instrument and line signals to balanced XLR output while rejecting noise. It operates on both +18V to +48V phantom power and a 9V battery, with ground lift, attenuation, and main/standby controls.
DI4
dbx
The dbx DI4 is a 4-channel active direct box and stereo line mixer in a half-rack unit, providing four independent DI channels with individual XLR outputs plus a stereo line mixer output. Per-channel pad switches, ground lift, volume, and pan controls allow keyboards and modules to be routed to both FOH and monitors independently.
DJDI
dbx
The dbx DJDI is a 2-channel passive direct box designed specifically for DJ and line-level sources, converting unbalanced signals to balanced XLR outputs across a wide range of signal levels. A continuously variable input attenuator, transformer isolation, and ground lift switch ensure clean, interference-free output.
MDB-1A
Mackie
Great for active instruments like guitars and basses with active pickups and preamps, the MDB-1A Active DI features increased headroom and distortion-free operation. Featuring a 1/4" high-impedance input and thru with -20db pad plus a Merge switch that turns the Thru jack into a second input, perfect for summing a stereo source to a mono output.
MDB-1P
Mackie
An essential tool for every musician and engineer, the MDB-1P Passive DI has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal noise. Featuring a 1/4" high-impedance input and thru with -15db pad and a balanced XLR output with ground lift.
MDB-2P
Mackie
Mackie MDB-2P Passive Stereo Direct Box for clean stereo audio from keyboards, synthesizers, and other high-impedance sources.
MDB-USB
Mackie
With the bus-powered MDB-USB Stereo DI, the days of relying on your headphone jack to get audio from a computer into analog gear are over. Combining a high-resolution audio interface with a noise and distortion-free stereo DI, MDB-USB converts your digital audio into clean, balanced, stereo output.
RNDI
Rupert Neve Designs
Active transformer direct interface (DI) box with a custom Rupert Neve-designed output transformer and class-A discrete FET input stage, designed to deliver a powerful, vibrant direct sound that captures the full harmonic depth of basses, guitars, acoustic instruments, and pre-recorded material.
RNDI-8
Rupert Neve Designs
Eight channels of the superb-sounding RNDI in one rack space, designed for high-end stage rigs, studios, and synth enthusiasts. Combines custom-wound output transformers and Class-A discrete FET input stages to deliver clarity and harmonic depth across instrument-level sources.
RNDI-M
Rupert Neve Designs
Compact, pedalboard-friendly active transformer direct interface that brings the tone and clarity of the original RNDI to a single-channel, stompbox-sized format. Built around a custom Rupert Neve Designs transformer and a discrete Class-A FET input stage in a rugged solid-steel chassis, with a 2.2 Megohm high-impedance input, ground lift switch, and passive 1/4" THRU output. Operates from 48V phantom power.
RNDI-S
Rupert Neve Designs
Stereo Active Transformer Direct Interface featuring custom Rupert Neve-designed output transformers and class-A, discrete FET input stages. An expanded two-channel direct interface designed to deliver powerful, vibrant direct sound for stereo and mono sources including instruments, pre-recorded material, and consumer devices. Powered by dual 48V phantom power with rugged steel frame built for touring.

This catalog is open source. View or improve the data on GitHub. View on GitHub